This looks like a LittleEndian/22x/raw file...
Total file size should be: 1243080988
Header size: 149788

...........RDB_HEADER_REC..................
Offset to/size of RDB_HEADER_REC: 0, 4096
...RDBM revision number: 20.006
...Rdy pkt run number: 49664
...Rdy pkt sequence number: 97
...Rdy pkt run number in char: 49664
...Scan date: 11/22/111
...Scan time: 19:19
...Logo, used to verify file: GE_MED_NMR
...Data type 0=emp 1=nrec 2=rw: 1
...unused: 0
...rhdacqctrl bit mask: 0
...rhrcctrl bit mask: 1
...rhexecctrl bit mask: 11
...scan type bit mask: 16
...rhtype bit mask: 64
...rhformat bit mask: 4
...rhrecon proc-a-son recon: 720
...rhdatacq proc-a-son dacq: 0
...rhnpasses passes for a scan: 1
...rhnpomp pomp group slices: 1
...rhnslices slices in a pass: 210
...rhnecho echoes of a slice: 1
...rhnavs number of excitations: 1
...rhnframes yres: 288
...rhbline baselines: 0
...rhhnover overscans: 0
...rhfrsize xres: 320
...rhptsize: 4
...rhvquant 3D volumes: 1
...RX cine heart phases: 1
...RX cine TR in sec: 1
...RX cine RR in sec: 1
...rhinitpass allocate passes: 1
...rhincrpass tps autopauses: 1
...rhmethod 0=recon, 1=psd: 0
...rhdaxres: 320
...rhdayres: 289
...rhrcxres: 512
...rhrcyres: 512
...rhimsize: 512
...RC Z res (power of 2 > rhnslices): 0
...rhrawsize: 1242931200
...rhsspsave: 0
...rhudasave: 0
...rhfermr fermi radius: 160
...rhfermw fermi width: 12.5
...rhferme fermi eccentricity: 1.11111
...rhclipmin 4x IP limit: 0
...rhclipmax 4x IP limit: 16383
...rhdoffset default offset: 0
...rhxoff scroll img in x: 0
...rhyoff scroll img in y: 0
...rhnwin hecho window width: 0
...rhntran hecho trans width: 2
...PS rhscalei: 0.000995051
...PS rhscaleq: 0
...RX rotation (0 90 180 270 deg): 0
...RX transpose (0, n/y transpose): 0
...rhblank zero image views: 0
...rhslblank slice blank 3D: 2
...RX Gradient coil (0=off 1=Schnk 2=Rmr): 0
...rhddaover unused: 0
...SARR bit mask 15 bits: 0
...SARR feeder timing info: 0
...SARR feeder timing info: 0
...SARR control of feeder: 0
...SARR df decimation ratio: 0
...SARR which feeder algorithm: 0
...rhdab0s rhdab0e start, stop receiver: 
  recs[0]: 0, rece[0]: 7
  recs[1]: 0, rece[1]: 0
  recs[2]: 0, rece[2]: 0
  recs[3]: 0, rece[3]: 0
...rhuser0: 14.4914
...rhuser1: 0.520833
...rhuser2: 0
...rhuser3: 0
...rhuser4: 0
...rhuser5: 0
...rhuser6: 0
...rhuser7: 0
...rhuser8: 0
...rhuser9: 0
...rhuser10: 0
...rhuser11: 0
...rhuser12: 0
...rhuser13: 0
...rhuser14: 0
...rhuser15: 0
...rhuser16: 0
...rhuser17: 0
...rhuser18: 0
...rhuser19: 0
...rhuser20: 0
...rhuser21: 0
...rhuser22: 0
...rhuser23: 0
...rhuser24: 0
...rhuser25: 0
...rhuser26: 0
...rhuser27: 0
...rhuser28: 0
...rhuser29: 0
...rhuser30: 0
...rhuser31: 0
...rhuser32: 0
...rhuser33: 0
...rhuser34: 0
...rhuser35: 0
...rhuser36: 0
...rhuser37: 0
...rhuser38: 0
...rhuser39: 0
...rhuser40: 0
...rhuser41: 0
...rhuser42: 0
...rhuser43: 0
...rhuser44: 0
...rhuser45: 0
...rhuser46: 0
...rhuser47: 0
...rhuser48: 0
...rhvtype bit mask 31 bits: 0
...RX x flow direction control: 0
...RX x flow direction control: 0
...RX x flow direction control: 0
...RX x flow direction control: 0
...RX y flow direction control: 0
...RX y flow direction control: 0
...RX y flow direction control: 0
...RX y flow direction control: 0
...RX z flow direction control: 0
...RX z flow direction control: 0
...RX z flow direction control: 0
...RX z flow direction control: 0
...RX weight for magnitude image 1: 0
...RX weight for magnitude image 2: 0
...RX weight for magnitude image 3: 0
...RX weight for magnitude image 4: 0
...RX velocity encoding cm/sec: 0
...Specwidth filter width kHz: 0
...Spectro CSI dims: 0
...rhspecrescsix: 0
...rhspecrescsiy: 0
...rhspecrescsiz: 0
...RX x CSI volume dimension: 0
...RX y CSI volume dimension: 0
...RX z CSI volume dimension: 0
...RX x CSI volume center: 0
...RX y CSI volume center: 0
...RX z CSI volume center: 0
...Number of dwell periods for spectro: 1
...PS internal use only: 0
...PS MPS R1 setting (1-7): 10
...PS MPS R2 setting (1-30): 29
...PS MPS transmit gain setting (0-200): 141
...PS MPS center frequency Hz: 1277244460
...PS APS R1 setting (1-7): 10
...PS APS R2 setting (1-30): 29
...PS APS transmit gain setting (0-200): 141
...PS APS center frequency Hz: 1277244460
...PS rational scaling: 0
...PS unused: 0
...PS noise test 0=16 1=32 bits: 135522645
...PS prescan order logic: 2
...PS bit mask 4 bits: 0
...PS powerspec: 
...PS filler1: 0
...PS filler2: 0
...Spectro full, half echo 0, 1: 0
...Variable "im_size_y": 0
...rhtype1 data_collect_type 1 bit mask: 327696
...rhfreqscale freq_scale k-space step: 1
...rhphasescale phase_scale k-space step: 0.9

			8x fields
...rhovl - overlaps for MOTSA: 0
...Linear Corr. 0:off, 1:linear, 2:polynomial: 0
...Fit number of points: 0
...Fit order: 2
...Linear phase correction average 0:off, 1:on: 0
...Const Corr. 0:off, 1:ky spec., 2:polyfit(2/ilv), 3:polyfit(1/ilv): 0
...Fit number of points: 2
...Fit order: 2
...External correction file 0:don't use, 1: use: 0
...Phase correction coef. image 0:off, 1:linear & constant: 1
...Interleaves to use for correction: 0=all, 1=only first: 0
...Bestky view for fractional ky scan: 0
...Phase correction research control: 0
...Phase correction threshold points: 2
...Phase correction beginning point to discard: 0
...Phase correction middle point to discard: 0
...Phase correction ending point to discard: 0
...Threshold percentage: 15
...Spacial best reference scan index: 0
...Temporal best reference scan index: 0
...Spare for phase correction: 1
...Number of interleaves: 1
...Ky traversal direction 0: top-down, 1:center-out: 0
...Alternate read sign 0=no, 1=odd/even, 2=pairs: 0
...Number of scan repetitions: 1
...Reference scan 0: off 1: on: 1
...Constant S term normalization factor: 0
...Constant polyfit weighting factor: 0
...Linear S term normalization factor: 0
...Linear polyfit weighting factor: 0
...Best ky location: 64
...Control word for VRG filter: 0
...Control word for VRGF final X resolution: 128
...Control word for bandpass asymmetry: 0
...Starting frequency: 0
...Ending frequency: 0
...Number of iterations used in homodyne processing: 0
...0: Fast receiver off, 1 - 5: LPF settings: 0
...Total number of frames for reference scan: 0
...Number of frames per pass for a reference scan: 0
...Total number of frames for an entire scan: 0
...Number of frames per pass: 0
...Spectro - user usage tag: 0
...Spectro - fillmapMSW: 0
...Spectro - fillmapLSW: 0
...Adjust view indexes, if set so bestky view = 0: 1
...First view within an echo group used for fit: 0
...Last view within an echo group used for fit: 0
...If = 1, force pts from other egrps to be used: 0
...If = 2, force slope to be set to pclinslope: 1
...If = 2, force slope to be set to pcconslope: 1
...Value to set linear slope to if forced: 0
...Value to set constant slope to if forced: 0
...If 1,2,3,4, use that coil's results for all: 1
...Variable view sharing mode: 0
...Number of original images: 0
...TR in microseconds: 0
...Gender: male or female: 0
...Slice ZIP factor: 0=off, 2, or 4: 1
...Coefficient A for flow image 1: 0
...Coefficient B for flow image 1: 0
...Coefficient C for flow image 1: 0
...Coefficient D for flow image 1: 0
...Coefficient A for flow image 2: 0
...Coefficient B for flow image 2: 0
...Coefficient C for flow image 2: 0
...Coefficient D for flow image 2: 0
...Coefficient A for flow image 3: 0
...Coefficient B for flow image 3: 0
...Coefficient C for flow image 3: 0
...Coefficient D for flow image 3: 0
...System utility control variable: 0
...EPI II diffusion control cv: 0
...Arrhythmia rejection window (percentage): 10
...Views per segment for FastCine: 8
...N-coil recon map: 0
...TE for first echo: 20000
...TE for second and later echoes: 50000
...BW for navigator frames: 4
...Control flag for dfm (0=off, other=on): 0
...Uncombined NEX at start of recon: 1
...Max navigator frames in a pass: 1
...Xres of navigator frames: 32
...Point size of navigator frames: 2
...Number of navigators per frame (tag table): 1
...Control flag for dfm debug: 0
...Threshold for navigator correction: 0
...Bit settings controlling gridding: 0
...B0 map enable and map size: 0
...TE difference between b0 map arms: 0
...Flag to apply motion compensation: 0
...Variable density transition: 0
...Variable density transition: 0
...Max gradient amplitude: 0
...Max slew rate: 0
...RX scan field of view: 0
...A to D sample time microsecs: 0
...Change factor for variable density: 0
...RX display field of view: 0

			9x fields
...Auto-Ncoil FOV: 160
...MFO FIESTA recon control: 0
...Auto post-processing opcode: 0
...Auto-Ncoil select: 0
...Auto-Ncoil limit: 45
...Auto post processing options: 0
...Gradient mode in Gemini project: 0
...Asset: 11
...Asset calibration threshold: 10000
...Asset R: 0.416667
...Asset coil number: 111244
...Asset phases: 1
...Table position: -4.92859
...Patient position: 1
...Patient entry: 2
...Landmark: 682.5

			11x fields
...For fat and water dual recon: 0
...Num. passes stored in a multi-pass Pfile (0 means 1 pass): 0
...Last slice number: 0
...Slice reduction factor: 0.416667
...Asset slab wrap: 0
...Coefficient for amount of phase correction: 0.5
...Navigator echo correction: 0
...Number of views of navigator echoes: 0
...Number of navigator echoes for actual correction: 2
...Start view for phase correction process: 1
...End view for phase correction process: 1
...Start shot for delta phase estimation in nav echoes: 1
...End shot for delta phase estimation in nav echoes: 2
...0 = modified Hanning, 1 = modified Tukey: 0
...Degree of apodization; 0.0 = boxcar, 1.0=hanning: 0.1
...Apodization at ends, 0.0 = max, 1.0 = boxcar: 0
...Surface coil intensity correction: 1 if enabled: 0
...Type of Clariview/name of filter: 0
...Edge parameters for enhanced recon: 0
...Smooth parameters for enhanced recon: 0
...Focus parameters for enhanced recon: 0
...Edge parameters for Clariview: 0
...Smooth parameters for Clariview: 0
...Focus parameters for Clariview: 0
...Reduction parameter for SCIC: 0
...Gauss parameter for SCIC: 0
...Threshold parameter for SCIC: 0
...Total Number of regions acquired by PSD: 0
...Total Number of input regions for reordering: 0
...Header field for smart prescan: 2
...K-space blanking field, left: 32
...K-space blanking field, right: 0
...Multi-exciter acquire type information from CV: 0
...Retrosective FSE phase correction control flag: 0
...Added for retrospective FSE phase correction: 0

			12x fields
...1st view to use for dynamic EPI phase correction: 0
...Last view to use for dynamic EPI phase correction: 0
...Number of passes to skip for dynamic EPI phase correction: 0
...Number of extra frames at top of k-space: 0
...Number of extra frames at bottom of k-space: 0
...Multiphase type 0 = interleaved, 1 = sequential: 0
...Number of phases in a multiphase scan: 1
...PURE flag from psd: 0
...Rec scale factor ratio for calibration scan: 0
...Byte offset to start of raw data (i.e size of POOL_HEADER): 149788
...Byte offset to start of rdb_hdr_per_pass of POOL_HEADER: 4096
...Byte offset to start of rdb_hdr_unlock_raw of POOL_HEADER: 20480
...Byte offset to start of rdb_hdr_data_acq_tab of POOL_HEADER: 36864
...Byte offset to start of rdb_hdr_nex_tab of POOL_HEADER: 135168
...Byte offset to start of rdb_hdr_nex_abort_tab of POOL_HEADER: 137220
...Byte offset to start of rdb_hdr_tool of POOL_HEADER: 139272
...Byte offset to start of rdb_hdr_exam of POOL_HEADER: 142820
...Byte offset to start of rdb_hdr_series of POOL_HEADER: 144780
...Byte offset to start of rdb_hdr_image of POOL_HEADER: 147340
...Byte offset to start of rdb_hdr_ps of POOL_HEADER: 141320
...spare b: 0
...New WW/WL algo enable/disable flag: 0
...Image area %: 60
...Histogram area top: 1
...Histogram area bottom: 1
...PURE noise reduction on=1/off=0: 1
...PURE cfg file value, filter: 1
...PURE cfg file value, fit_order: 2
...PURE cfg file value, kernelsize_z: 3
...PURE cfg file value, kernelsize_xy: 8
...PURE cfg file value, weight_radius: 32
...PURE cfg file value, intensity_scale: 2
...PURE cfg file value, noise_threshold: 75
...MART deblurring kernel, wienera: 0
...MART deblurring kernel, wienerb: 0
...MART deblurring kernel, wienert2: 0
...MART deblurring kernel, wieneresp: 0
...MART deblurring kernel, wiener: 0
...MART deblurring kernel, flipfilter: 0
...MART deblurring kernel, dbgrecon: 0
...MART deblurring kernel, ech2skip: 0
...Tricks type 0 = subtracted, 1 = unsubtracted: 0
...LC fiesta phase: 0
...LC fiesta: 0
...Half echo raw data filter, herawflt: 0
...Half echo raw data filter, herawflt_befnwin: 1
...Half echo raw data filter, herawflt_befntran: 2
...Half echo raw data filter, herawflt_befamp: 1
...Half echo raw data filter, herawflt_hpfamp: 1
...Half echo over-sampling: 0
...PURE Correction threshold: 0

			14x fields
...SWIFT enable/disable flag: 0
...Number of slabs to be used by TRICKS: 1
...Number of coils to SWIFT between: 0
...autoshim successful (1), autoshim failed/smart/OFF (0): 0
...Number of phases for dynamic plan: 0

			15x fields
...MEDAL configuration bitmask: 0
...MEDAL pixel stack size: 54
...MEDAL in-phase, out-of-phase order: 0
...MEDAL max adaptive region growing kernel size: 15
...MEDAL min adaptive region growing kernel size: 8
...MEDAL field smoothing kernel size: 8
...MEDAL 2D region growing start slice: 0
...MEDAL 2D region growing end slice: 10
...IDEAL enable/disable flag: 0
...IDEAL image options and control bits: 0
...IDEAL delta frequency between two species : 5333.34
...IDEAL bandwidth in Hz: 62.5
...IDEAL first echo time in ms: 20.827
...IDEAL echo spacing in ms : 0.0625
...IDEAL "This will give the number of extra points": 0
...Set to 1 for VIBRANT scans: 0
...Set to 1 for torso scans (ASSET): 0
...Set to 1 to use reapodized cal (ASSET): 0
...Unique ID for kacq_yz.txt files: 1122191935
...Set to 1 for local Tx phased arrays: 0
...Used to scale 3D acqs to avoid over-range: 1
...Scanner mode: 1 = Product, 2 = Research, 3 = Service: 2

			20x fields
...Deprecated rhrawsize: 0
...Deprecated rhsspsave: 0
...Deprecated rhudasave: 0
...Channel translation table entry type: 
   Entry 0:
    The logicalCoilName of the active coil: RL-GE_HDx TR Knee PA
    The clinicalCoilName of the active coil: C-GE_HDx TR Knee PA
    A unique identifier based on coil parameters: 111244
    The coilConnector to which the active coil is connected: 3940705508524033
    Indicates whether this config is used for active scanning: 562954249437199
    The channel translation map for this config: 3, 4
...The variable rdb_hdr_psc_ta: 69
...rhdiskacqctrl control: 0
...Set to 1 for broadband exciter, 0 for narrowband exciter: 1

			16x/22x fields
...Total number of B values for Multi-B DWI: 1
...Number of diffusion directions: 1: Single, 3: Three, 4: Tetrahedral: 1
...Image-based NEX number for T2 (Smart nex): 1
...NEX number for each b-value in multi-B eDWI: 
    NEX = 1 (table entry 0)
...Sum-of-squares recon (0), Complex channel combine recon (1): 0
...Value of NEX table for unacquired encodes: 1

...........RDB_DATA_ACQ_TAB..................
Offset to/size of RDB_DATA_ACQ_TAB: 36864, 98304
Slice 0, pass = 0, slice in pass = 1, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 17.7081, 104.531, -80
  point 2: 17.7081, 104.531, 80
  point 3: 17.7081, -55.469, -80
Slice 1, pass = 0, slice in pass = 2, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 17.1081, 104.531, -80
  point 2: 17.1081, 104.531, 80
  point 3: 17.1081, -55.469, -80
Slice 2, pass = 0, slice in pass = 3, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 16.5081, 104.531, -80
  point 2: 16.5081, 104.531, 80
  point 3: 16.5081, -55.469, -80
Slice 3, pass = 0, slice in pass = 4, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 15.9081, 104.531, -80
  point 2: 15.9081, 104.531, 80
  point 3: 15.9081, -55.469, -80
Slice 4, pass = 0, slice in pass = 5, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 15.3081, 104.531, -80
  point 2: 15.3081, 104.531, 80
  point 3: 15.3081, -55.469, -80
Slice 5, pass = 0, slice in pass = 6, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 14.7081, 104.531, -80
  point 2: 14.7081, 104.531, 80
  point 3: 14.7081, -55.469, -80
Slice 6, pass = 0, slice in pass = 7, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 14.1081, 104.531, -80
  point 2: 14.1081, 104.531, 80
  point 3: 14.1081, -55.469, -80
Slice 7, pass = 0, slice in pass = 8, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 13.5081, 104.531, -80
  point 2: 13.5081, 104.531, 80
  point 3: 13.5081, -55.469, -80
Slice 8, pass = 0, slice in pass = 9, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 12.9081, 104.531, -80
  point 2: 12.9081, 104.531, 80
  point 3: 12.9081, -55.469, -80
Slice 9, pass = 0, slice in pass = 10, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 12.3081, 104.531, -80
  point 2: 12.3081, 104.531, 80
  point 3: 12.3081, -55.469, -80
Slice 10, pass = 0, slice in pass = 11, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 11.7081, 104.531, -80
  point 2: 11.7081, 104.531, 80
  point 3: 11.7081, -55.469, -80
Slice 11, pass = 0, slice in pass = 12, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 11.1081, 104.531, -80
  point 2: 11.1081, 104.531, 80
  point 3: 11.1081, -55.469, -80
Slice 12, pass = 0, slice in pass = 13, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 10.5081, 104.531, -80
  point 2: 10.5081, 104.531, 80
  point 3: 10.5081, -55.469, -80
Slice 13, pass = 0, slice in pass = 14, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 9.90808, 104.531, -80
  point 2: 9.90808, 104.531, 80
  point 3: 9.90808, -55.469, -80
Slice 14, pass = 0, slice in pass = 15, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 9.30808, 104.531, -80
  point 2: 9.30808, 104.531, 80
  point 3: 9.30808, -55.469, -80
Slice 15, pass = 0, slice in pass = 16, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 8.70808, 104.531, -80
  point 2: 8.70808, 104.531, 80
  point 3: 8.70808, -55.469, -80
Slice 16, pass = 0, slice in pass = 17, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 8.10808, 104.531, -80
  point 2: 8.10808, 104.531, 80
  point 3: 8.10808, -55.469, -80
Slice 17, pass = 0, slice in pass = 18, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 7.50808, 104.531, -80
  point 2: 7.50808, 104.531, 80
  point 3: 7.50808, -55.469, -80
Slice 18, pass = 0, slice in pass = 19, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 6.90808, 104.531, -80
  point 2: 6.90808, 104.531, 80
  point 3: 6.90808, -55.469, -80
Slice 19, pass = 0, slice in pass = 20, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 6.30808, 104.531, -80
  point 2: 6.30808, 104.531, 80
  point 3: 6.30808, -55.469, -80
Slice 20, pass = 0, slice in pass = 21, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 5.70808, 104.531, -80
  point 2: 5.70808, 104.531, 80
  point 3: 5.70808, -55.469, -80
Slice 21, pass = 0, slice in pass = 22, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 5.10808, 104.531, -80
  point 2: 5.10808, 104.531, 80
  point 3: 5.10808, -55.469, -80
Slice 22, pass = 0, slice in pass = 23, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 4.50808, 104.531, -80
  point 2: 4.50808, 104.531, 80
  point 3: 4.50808, -55.469, -80
Slice 23, pass = 0, slice in pass = 24, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 3.90808, 104.531, -80
  point 2: 3.90808, 104.531, 80
  point 3: 3.90808, -55.469, -80
Slice 24, pass = 0, slice in pass = 25, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 3.30808, 104.531, -80
  point 2: 3.30808, 104.531, 80
  point 3: 3.30808, -55.469, -80
Slice 25, pass = 0, slice in pass = 26, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 2.70808, 104.531, -80
  point 2: 2.70808, 104.531, 80
  point 3: 2.70808, -55.469, -80
Slice 26, pass = 0, slice in pass = 27, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 2.10808, 104.531, -80
  point 2: 2.10808, 104.531, 80
  point 3: 2.10808, -55.469, -80
Slice 27, pass = 0, slice in pass = 28, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 1.50808, 104.531, -80
  point 2: 1.50808, 104.531, 80
  point 3: 1.50808, -55.469, -80
Slice 28, pass = 0, slice in pass = 29, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 0.908085, 104.531, -80
  point 2: 0.908085, 104.531, 80
  point 3: 0.908085, -55.469, -80
Slice 29, pass = 0, slice in pass = 30, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: 0.308085, 104.531, -80
  point 2: 0.308085, 104.531, 80
  point 3: 0.308085, -55.469, -80
Slice 30, pass = 0, slice in pass = 31, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -0.291915, 104.531, -80
  point 2: -0.291915, 104.531, 80
  point 3: -0.291915, -55.469, -80
Slice 31, pass = 0, slice in pass = 32, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -0.891915, 104.531, -80
  point 2: -0.891915, 104.531, 80
  point 3: -0.891915, -55.469, -80
Slice 32, pass = 0, slice in pass = 33, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -1.49192, 104.531, -80
  point 2: -1.49192, 104.531, 80
  point 3: -1.49192, -55.469, -80
Slice 33, pass = 0, slice in pass = 34, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -2.09192, 104.531, -80
  point 2: -2.09192, 104.531, 80
  point 3: -2.09192, -55.469, -80
Slice 34, pass = 0, slice in pass = 35, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -2.69192, 104.531, -80
  point 2: -2.69192, 104.531, 80
  point 3: -2.69192, -55.469, -80
Slice 35, pass = 0, slice in pass = 36, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -3.29192, 104.531, -80
  point 2: -3.29192, 104.531, 80
  point 3: -3.29192, -55.469, -80
Slice 36, pass = 0, slice in pass = 37, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -3.89192, 104.531, -80
  point 2: -3.89192, 104.531, 80
  point 3: -3.89192, -55.469, -80
Slice 37, pass = 0, slice in pass = 38, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -4.49192, 104.531, -80
  point 2: -4.49192, 104.531, 80
  point 3: -4.49192, -55.469, -80
Slice 38, pass = 0, slice in pass = 39, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -5.09192, 104.531, -80
  point 2: -5.09192, 104.531, 80
  point 3: -5.09192, -55.469, -80
Slice 39, pass = 0, slice in pass = 40, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -5.69192, 104.531, -80
  point 2: -5.69192, 104.531, 80
  point 3: -5.69192, -55.469, -80
Slice 40, pass = 0, slice in pass = 41, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -6.29191, 104.531, -80
  point 2: -6.29191, 104.531, 80
  point 3: -6.29191, -55.469, -80
Slice 41, pass = 0, slice in pass = 42, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -6.89191, 104.531, -80
  point 2: -6.89191, 104.531, 80
  point 3: -6.89191, -55.469, -80
Slice 42, pass = 0, slice in pass = 43, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -7.49191, 104.531, -80
  point 2: -7.49191, 104.531, 80
  point 3: -7.49191, -55.469, -80
Slice 43, pass = 0, slice in pass = 44, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -8.09192, 104.531, -80
  point 2: -8.09192, 104.531, 80
  point 3: -8.09192, -55.469, -80
Slice 44, pass = 0, slice in pass = 45, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -8.69192, 104.531, -80
  point 2: -8.69192, 104.531, 80
  point 3: -8.69192, -55.469, -80
Slice 45, pass = 0, slice in pass = 46, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -9.29192, 104.531, -80
  point 2: -9.29192, 104.531, 80
  point 3: -9.29192, -55.469, -80
Slice 46, pass = 0, slice in pass = 47, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -9.89192, 104.531, -80
  point 2: -9.89192, 104.531, 80
  point 3: -9.89192, -55.469, -80
Slice 47, pass = 0, slice in pass = 48, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -10.4919, 104.531, -80
  point 2: -10.4919, 104.531, 80
  point 3: -10.4919, -55.469, -80
Slice 48, pass = 0, slice in pass = 49, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -11.0919, 104.531, -80
  point 2: -11.0919, 104.531, 80
  point 3: -11.0919, -55.469, -80
Slice 49, pass = 0, slice in pass = 50, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -11.6919, 104.531, -80
  point 2: -11.6919, 104.531, 80
  point 3: -11.6919, -55.469, -80
Slice 50, pass = 0, slice in pass = 51, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -12.2919, 104.531, -80
  point 2: -12.2919, 104.531, 80
  point 3: -12.2919, -55.469, -80
Slice 51, pass = 0, slice in pass = 52, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -12.8919, 104.531, -80
  point 2: -12.8919, 104.531, 80
  point 3: -12.8919, -55.469, -80
Slice 52, pass = 0, slice in pass = 53, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -13.4919, 104.531, -80
  point 2: -13.4919, 104.531, 80
  point 3: -13.4919, -55.469, -80
Slice 53, pass = 0, slice in pass = 54, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -14.0919, 104.531, -80
  point 2: -14.0919, 104.531, 80
  point 3: -14.0919, -55.469, -80
Slice 54, pass = 0, slice in pass = 55, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -14.6919, 104.531, -80
  point 2: -14.6919, 104.531, 80
  point 3: -14.6919, -55.469, -80
Slice 55, pass = 0, slice in pass = 56, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -15.2919, 104.531, -80
  point 2: -15.2919, 104.531, 80
  point 3: -15.2919, -55.469, -80
Slice 56, pass = 0, slice in pass = 57, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -15.8919, 104.531, -80
  point 2: -15.8919, 104.531, 80
  point 3: -15.8919, -55.469, -80
Slice 57, pass = 0, slice in pass = 58, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -16.4919, 104.531, -80
  point 2: -16.4919, 104.531, 80
  point 3: -16.4919, -55.469, -80
Slice 58, pass = 0, slice in pass = 59, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -17.0919, 104.531, -80
  point 2: -17.0919, 104.531, 80
  point 3: -17.0919, -55.469, -80
Slice 59, pass = 0, slice in pass = 60, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -17.6919, 104.531, -80
  point 2: -17.6919, 104.531, 80
  point 3: -17.6919, -55.469, -80
Slice 60, pass = 0, slice in pass = 61, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -18.2919, 104.531, -80
  point 2: -18.2919, 104.531, 80
  point 3: -18.2919, -55.469, -80
Slice 61, pass = 0, slice in pass = 62, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -18.8919, 104.531, -80
  point 2: -18.8919, 104.531, 80
  point 3: -18.8919, -55.469, -80
Slice 62, pass = 0, slice in pass = 63, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -19.4919, 104.531, -80
  point 2: -19.4919, 104.531, 80
  point 3: -19.4919, -55.469, -80
Slice 63, pass = 0, slice in pass = 64, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -20.0919, 104.531, -80
  point 2: -20.0919, 104.531, 80
  point 3: -20.0919, -55.469, -80
Slice 64, pass = 0, slice in pass = 65, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -20.6919, 104.531, -80
  point 2: -20.6919, 104.531, 80
  point 3: -20.6919, -55.469, -80
Slice 65, pass = 0, slice in pass = 66, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -21.2919, 104.531, -80
  point 2: -21.2919, 104.531, 80
  point 3: -21.2919, -55.469, -80
Slice 66, pass = 0, slice in pass = 67, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -21.8919, 104.531, -80
  point 2: -21.8919, 104.531, 80
  point 3: -21.8919, -55.469, -80
Slice 67, pass = 0, slice in pass = 68, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -22.4919, 104.531, -80
  point 2: -22.4919, 104.531, 80
  point 3: -22.4919, -55.469, -80
Slice 68, pass = 0, slice in pass = 69, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -23.0919, 104.531, -80
  point 2: -23.0919, 104.531, 80
  point 3: -23.0919, -55.469, -80
Slice 69, pass = 0, slice in pass = 70, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -23.6919, 104.531, -80
  point 2: -23.6919, 104.531, 80
  point 3: -23.6919, -55.469, -80
Slice 70, pass = 0, slice in pass = 71, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -24.2919, 104.531, -80
  point 2: -24.2919, 104.531, 80
  point 3: -24.2919, -55.469, -80
Slice 71, pass = 0, slice in pass = 72, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -24.8919, 104.531, -80
  point 2: -24.8919, 104.531, 80
  point 3: -24.8919, -55.469, -80
Slice 72, pass = 0, slice in pass = 73, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -25.4919, 104.531, -80
  point 2: -25.4919, 104.531, 80
  point 3: -25.4919, -55.469, -80
Slice 73, pass = 0, slice in pass = 74, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -26.0919, 104.531, -80
  point 2: -26.0919, 104.531, 80
  point 3: -26.0919, -55.469, -80
Slice 74, pass = 0, slice in pass = 75, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -26.6919, 104.531, -80
  point 2: -26.6919, 104.531, 80
  point 3: -26.6919, -55.469, -80
Slice 75, pass = 0, slice in pass = 76, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -27.2919, 104.531, -80
  point 2: -27.2919, 104.531, 80
  point 3: -27.2919, -55.469, -80
Slice 76, pass = 0, slice in pass = 77, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -27.8919, 104.531, -80
  point 2: -27.8919, 104.531, 80
  point 3: -27.8919, -55.469, -80
Slice 77, pass = 0, slice in pass = 78, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -28.4919, 104.531, -80
  point 2: -28.4919, 104.531, 80
  point 3: -28.4919, -55.469, -80
Slice 78, pass = 0, slice in pass = 79, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -29.0919, 104.531, -80
  point 2: -29.0919, 104.531, 80
  point 3: -29.0919, -55.469, -80
Slice 79, pass = 0, slice in pass = 80, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -29.6919, 104.531, -80
  point 2: -29.6919, 104.531, 80
  point 3: -29.6919, -55.469, -80
Slice 80, pass = 0, slice in pass = 81, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -30.2919, 104.531, -80
  point 2: -30.2919, 104.531, 80
  point 3: -30.2919, -55.469, -80
Slice 81, pass = 0, slice in pass = 82, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -30.8919, 104.531, -80
  point 2: -30.8919, 104.531, 80
  point 3: -30.8919, -55.469, -80
Slice 82, pass = 0, slice in pass = 83, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -31.4919, 104.531, -80
  point 2: -31.4919, 104.531, 80
  point 3: -31.4919, -55.469, -80
Slice 83, pass = 0, slice in pass = 84, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -32.0919, 104.531, -80
  point 2: -32.0919, 104.531, 80
  point 3: -32.0919, -55.469, -80
Slice 84, pass = 0, slice in pass = 85, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -32.6919, 104.531, -80
  point 2: -32.6919, 104.531, 80
  point 3: -32.6919, -55.469, -80
Slice 85, pass = 0, slice in pass = 86, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -33.2919, 104.531, -80
  point 2: -33.2919, 104.531, 80
  point 3: -33.2919, -55.469, -80
Slice 86, pass = 0, slice in pass = 87, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -33.8919, 104.531, -80
  point 2: -33.8919, 104.531, 80
  point 3: -33.8919, -55.469, -80
Slice 87, pass = 0, slice in pass = 88, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -34.4919, 104.531, -80
  point 2: -34.4919, 104.531, 80
  point 3: -34.4919, -55.469, -80
Slice 88, pass = 0, slice in pass = 89, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -35.0919, 104.531, -80
  point 2: -35.0919, 104.531, 80
  point 3: -35.0919, -55.469, -80
Slice 89, pass = 0, slice in pass = 90, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -35.6919, 104.531, -80
  point 2: -35.6919, 104.531, 80
  point 3: -35.6919, -55.469, -80
Slice 90, pass = 0, slice in pass = 91, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -36.2919, 104.531, -80
  point 2: -36.2919, 104.531, 80
  point 3: -36.2919, -55.469, -80
Slice 91, pass = 0, slice in pass = 92, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -36.8919, 104.531, -80
  point 2: -36.8919, 104.531, 80
  point 3: -36.8919, -55.469, -80
Slice 92, pass = 0, slice in pass = 93, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -37.4919, 104.531, -80
  point 2: -37.4919, 104.531, 80
  point 3: -37.4919, -55.469, -80
Slice 93, pass = 0, slice in pass = 94, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -38.0919, 104.531, -80
  point 2: -38.0919, 104.531, 80
  point 3: -38.0919, -55.469, -80
Slice 94, pass = 0, slice in pass = 95, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -38.6919, 104.531, -80
  point 2: -38.6919, 104.531, 80
  point 3: -38.6919, -55.469, -80
Slice 95, pass = 0, slice in pass = 96, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -39.2919, 104.531, -80
  point 2: -39.2919, 104.531, 80
  point 3: -39.2919, -55.469, -80
Slice 96, pass = 0, slice in pass = 97, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -39.8919, 104.531, -80
  point 2: -39.8919, 104.531, 80
  point 3: -39.8919, -55.469, -80
Slice 97, pass = 0, slice in pass = 98, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -40.4919, 104.531, -80
  point 2: -40.4919, 104.531, 80
  point 3: -40.4919, -55.469, -80
Slice 98, pass = 0, slice in pass = 99, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -41.0919, 104.531, -80
  point 2: -41.0919, 104.531, 80
  point 3: -41.0919, -55.469, -80
Slice 99, pass = 0, slice in pass = 100, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -41.6919, 104.531, -80
  point 2: -41.6919, 104.531, 80
  point 3: -41.6919, -55.469, -80
Slice 100, pass = 0, slice in pass = 101, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -42.2919, 104.531, -80
  point 2: -42.2919, 104.531, 80
  point 3: -42.2919, -55.469, -80
Slice 101, pass = 0, slice in pass = 102, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -42.8919, 104.531, -80
  point 2: -42.8919, 104.531, 80
  point 3: -42.8919, -55.469, -80
Slice 102, pass = 0, slice in pass = 103, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -43.4919, 104.531, -80
  point 2: -43.4919, 104.531, 80
  point 3: -43.4919, -55.469, -80
Slice 103, pass = 0, slice in pass = 104, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -44.0919, 104.531, -80
  point 2: -44.0919, 104.531, 80
  point 3: -44.0919, -55.469, -80
Slice 104, pass = 0, slice in pass = 105, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -44.6919, 104.531, -80
  point 2: -44.6919, 104.531, 80
  point 3: -44.6919, -55.469, -80
Slice 105, pass = 0, slice in pass = 106, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -45.2919, 104.531, -80
  point 2: -45.2919, 104.531, 80
  point 3: -45.2919, -55.469, -80
Slice 106, pass = 0, slice in pass = 107, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -45.8919, 104.531, -80
  point 2: -45.8919, 104.531, 80
  point 3: -45.8919, -55.469, -80
Slice 107, pass = 0, slice in pass = 108, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -46.4919, 104.531, -80
  point 2: -46.4919, 104.531, 80
  point 3: -46.4919, -55.469, -80
Slice 108, pass = 0, slice in pass = 109, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -47.0919, 104.531, -80
  point 2: -47.0919, 104.531, 80
  point 3: -47.0919, -55.469, -80
Slice 109, pass = 0, slice in pass = 110, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -47.6919, 104.531, -80
  point 2: -47.6919, 104.531, 80
  point 3: -47.6919, -55.469, -80
Slice 110, pass = 0, slice in pass = 111, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -48.2919, 104.531, -80
  point 2: -48.2919, 104.531, 80
  point 3: -48.2919, -55.469, -80
Slice 111, pass = 0, slice in pass = 112, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -48.8919, 104.531, -80
  point 2: -48.8919, 104.531, 80
  point 3: -48.8919, -55.469, -80
Slice 112, pass = 0, slice in pass = 113, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -49.4919, 104.531, -80
  point 2: -49.4919, 104.531, 80
  point 3: -49.4919, -55.469, -80
Slice 113, pass = 0, slice in pass = 114, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -50.0919, 104.531, -80
  point 2: -50.0919, 104.531, 80
  point 3: -50.0919, -55.469, -80
Slice 114, pass = 0, slice in pass = 115, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -50.6919, 104.531, -80
  point 2: -50.6919, 104.531, 80
  point 3: -50.6919, -55.469, -80
Slice 115, pass = 0, slice in pass = 116, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -51.2919, 104.531, -80
  point 2: -51.2919, 104.531, 80
  point 3: -51.2919, -55.469, -80
Slice 116, pass = 0, slice in pass = 117, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -51.8919, 104.531, -80
  point 2: -51.8919, 104.531, 80
  point 3: -51.8919, -55.469, -80
Slice 117, pass = 0, slice in pass = 118, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -52.4919, 104.531, -80
  point 2: -52.4919, 104.531, 80
  point 3: -52.4919, -55.469, -80
Slice 118, pass = 0, slice in pass = 119, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -53.0919, 104.531, -80
  point 2: -53.0919, 104.531, 80
  point 3: -53.0919, -55.469, -80
Slice 119, pass = 0, slice in pass = 120, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -53.6919, 104.531, -80
  point 2: -53.6919, 104.531, 80
  point 3: -53.6919, -55.469, -80
Slice 120, pass = 0, slice in pass = 121, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -54.2919, 104.531, -80
  point 2: -54.2919, 104.531, 80
  point 3: -54.2919, -55.469, -80
Slice 121, pass = 0, slice in pass = 122, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -54.8919, 104.531, -80
  point 2: -54.8919, 104.531, 80
  point 3: -54.8919, -55.469, -80
Slice 122, pass = 0, slice in pass = 123, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -55.4919, 104.531, -80
  point 2: -55.4919, 104.531, 80
  point 3: -55.4919, -55.469, -80
Slice 123, pass = 0, slice in pass = 124, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -56.0919, 104.531, -80
  point 2: -56.0919, 104.531, 80
  point 3: -56.0919, -55.469, -80
Slice 124, pass = 0, slice in pass = 125, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -56.6919, 104.531, -80
  point 2: -56.6919, 104.531, 80
  point 3: -56.6919, -55.469, -80
Slice 125, pass = 0, slice in pass = 126, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -57.2919, 104.531, -80
  point 2: -57.2919, 104.531, 80
  point 3: -57.2919, -55.469, -80
Slice 126, pass = 0, slice in pass = 127, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -57.8919, 104.531, -80
  point 2: -57.8919, 104.531, 80
  point 3: -57.8919, -55.469, -80
Slice 127, pass = 0, slice in pass = 128, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -58.4919, 104.531, -80
  point 2: -58.4919, 104.531, 80
  point 3: -58.4919, -55.469, -80
Slice 128, pass = 0, slice in pass = 129, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -59.0919, 104.531, -80
  point 2: -59.0919, 104.531, 80
  point 3: -59.0919, -55.469, -80
Slice 129, pass = 0, slice in pass = 130, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -59.6919, 104.531, -80
  point 2: -59.6919, 104.531, 80
  point 3: -59.6919, -55.469, -80
Slice 130, pass = 0, slice in pass = 131, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -60.2919, 104.531, -80
  point 2: -60.2919, 104.531, 80
  point 3: -60.2919, -55.469, -80
Slice 131, pass = 0, slice in pass = 132, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -60.8919, 104.531, -80
  point 2: -60.8919, 104.531, 80
  point 3: -60.8919, -55.469, -80
Slice 132, pass = 0, slice in pass = 133, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -61.4919, 104.531, -80
  point 2: -61.4919, 104.531, 80
  point 3: -61.4919, -55.469, -80
Slice 133, pass = 0, slice in pass = 134, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -62.0919, 104.531, -80
  point 2: -62.0919, 104.531, 80
  point 3: -62.0919, -55.469, -80
Slice 134, pass = 0, slice in pass = 135, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -62.6919, 104.531, -80
  point 2: -62.6919, 104.531, 80
  point 3: -62.6919, -55.469, -80
Slice 135, pass = 0, slice in pass = 136, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -63.2919, 104.531, -80
  point 2: -63.2919, 104.531, 80
  point 3: -63.2919, -55.469, -80
Slice 136, pass = 0, slice in pass = 137, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -63.8918, 104.531, -80
  point 2: -63.8918, 104.531, 80
  point 3: -63.8918, -55.469, -80
Slice 137, pass = 0, slice in pass = 138, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -64.4919, 104.531, -80
  point 2: -64.4919, 104.531, 80
  point 3: -64.4919, -55.469, -80
Slice 138, pass = 0, slice in pass = 139, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -65.0919, 104.531, -80
  point 2: -65.0919, 104.531, 80
  point 3: -65.0919, -55.469, -80
Slice 139, pass = 0, slice in pass = 140, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -65.6918, 104.531, -80
  point 2: -65.6918, 104.531, 80
  point 3: -65.6918, -55.469, -80
Slice 140, pass = 0, slice in pass = 141, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -66.2918, 104.531, -80
  point 2: -66.2918, 104.531, 80
  point 3: -66.2918, -55.469, -80
Slice 141, pass = 0, slice in pass = 142, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -66.8918, 104.531, -80
  point 2: -66.8918, 104.531, 80
  point 3: -66.8918, -55.469, -80
Slice 142, pass = 0, slice in pass = 143, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -67.4918, 104.531, -80
  point 2: -67.4918, 104.531, 80
  point 3: -67.4918, -55.469, -80
Slice 143, pass = 0, slice in pass = 144, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -68.0918, 104.531, -80
  point 2: -68.0918, 104.531, 80
  point 3: -68.0918, -55.469, -80
Slice 144, pass = 0, slice in pass = 145, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -68.6918, 104.531, -80
  point 2: -68.6918, 104.531, 80
  point 3: -68.6918, -55.469, -80
Slice 145, pass = 0, slice in pass = 146, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -69.2918, 104.531, -80
  point 2: -69.2918, 104.531, 80
  point 3: -69.2918, -55.469, -80
Slice 146, pass = 0, slice in pass = 147, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -69.8918, 104.531, -80
  point 2: -69.8918, 104.531, 80
  point 3: -69.8918, -55.469, -80
Slice 147, pass = 0, slice in pass = 148, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -70.4918, 104.531, -80
  point 2: -70.4918, 104.531, 80
  point 3: -70.4918, -55.469, -80
Slice 148, pass = 0, slice in pass = 149, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -71.0918, 104.531, -80
  point 2: -71.0918, 104.531, 80
  point 3: -71.0918, -55.469, -80
Slice 149, pass = 0, slice in pass = 150, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -71.6918, 104.531, -80
  point 2: -71.6918, 104.531, 80
  point 3: -71.6918, -55.469, -80
Slice 150, pass = 0, slice in pass = 151, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -72.2918, 104.531, -80
  point 2: -72.2918, 104.531, 80
  point 3: -72.2918, -55.469, -80
Slice 151, pass = 0, slice in pass = 152, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -72.8918, 104.531, -80
  point 2: -72.8918, 104.531, 80
  point 3: -72.8918, -55.469, -80
Slice 152, pass = 0, slice in pass = 153, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -73.4918, 104.531, -80
  point 2: -73.4918, 104.531, 80
  point 3: -73.4918, -55.469, -80
Slice 153, pass = 0, slice in pass = 154, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -74.0918, 104.531, -80
  point 2: -74.0918, 104.531, 80
  point 3: -74.0918, -55.469, -80
Slice 154, pass = 0, slice in pass = 155, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -74.6918, 104.531, -80
  point 2: -74.6918, 104.531, 80
  point 3: -74.6918, -55.469, -80
Slice 155, pass = 0, slice in pass = 156, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -75.2918, 104.531, -80
  point 2: -75.2918, 104.531, 80
  point 3: -75.2918, -55.469, -80
Slice 156, pass = 0, slice in pass = 157, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -75.8918, 104.531, -80
  point 2: -75.8918, 104.531, 80
  point 3: -75.8918, -55.469, -80
Slice 157, pass = 0, slice in pass = 158, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -76.4918, 104.531, -80
  point 2: -76.4918, 104.531, 80
  point 3: -76.4918, -55.469, -80
Slice 158, pass = 0, slice in pass = 159, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -77.0918, 104.531, -80
  point 2: -77.0918, 104.531, 80
  point 3: -77.0918, -55.469, -80
Slice 159, pass = 0, slice in pass = 160, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -77.6918, 104.531, -80
  point 2: -77.6918, 104.531, 80
  point 3: -77.6918, -55.469, -80
Slice 160, pass = 0, slice in pass = 161, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -78.2918, 104.531, -80
  point 2: -78.2918, 104.531, 80
  point 3: -78.2918, -55.469, -80
Slice 161, pass = 0, slice in pass = 162, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -78.8918, 104.531, -80
  point 2: -78.8918, 104.531, 80
  point 3: -78.8918, -55.469, -80
Slice 162, pass = 0, slice in pass = 163, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -79.4918, 104.531, -80
  point 2: -79.4918, 104.531, 80
  point 3: -79.4918, -55.469, -80
Slice 163, pass = 0, slice in pass = 164, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -80.0918, 104.531, -80
  point 2: -80.0918, 104.531, 80
  point 3: -80.0918, -55.469, -80
Slice 164, pass = 0, slice in pass = 165, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -80.6918, 104.531, -80
  point 2: -80.6918, 104.531, 80
  point 3: -80.6918, -55.469, -80
Slice 165, pass = 0, slice in pass = 166, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -81.2918, 104.531, -80
  point 2: -81.2918, 104.531, 80
  point 3: -81.2918, -55.469, -80
Slice 166, pass = 0, slice in pass = 167, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -81.8918, 104.531, -80
  point 2: -81.8918, 104.531, 80
  point 3: -81.8918, -55.469, -80
Slice 167, pass = 0, slice in pass = 168, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -82.4918, 104.531, -80
  point 2: -82.4918, 104.531, 80
  point 3: -82.4918, -55.469, -80
Slice 168, pass = 0, slice in pass = 169, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -83.0918, 104.531, -80
  point 2: -83.0918, 104.531, 80
  point 3: -83.0918, -55.469, -80
Slice 169, pass = 0, slice in pass = 170, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -83.6918, 104.531, -80
  point 2: -83.6918, 104.531, 80
  point 3: -83.6918, -55.469, -80
Slice 170, pass = 0, slice in pass = 171, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -84.2918, 104.531, -80
  point 2: -84.2918, 104.531, 80
  point 3: -84.2918, -55.469, -80
Slice 171, pass = 0, slice in pass = 172, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -84.8918, 104.531, -80
  point 2: -84.8918, 104.531, 80
  point 3: -84.8918, -55.469, -80
Slice 172, pass = 0, slice in pass = 173, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -85.4918, 104.531, -80
  point 2: -85.4918, 104.531, 80
  point 3: -85.4918, -55.469, -80
Slice 173, pass = 0, slice in pass = 174, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -86.0918, 104.531, -80
  point 2: -86.0918, 104.531, 80
  point 3: -86.0918, -55.469, -80
Slice 174, pass = 0, slice in pass = 175, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -86.6918, 104.531, -80
  point 2: -86.6918, 104.531, 80
  point 3: -86.6918, -55.469, -80
Slice 175, pass = 0, slice in pass = 176, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -87.2918, 104.531, -80
  point 2: -87.2918, 104.531, 80
  point 3: -87.2918, -55.469, -80
Slice 176, pass = 0, slice in pass = 177, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -87.8918, 104.531, -80
  point 2: -87.8918, 104.531, 80
  point 3: -87.8918, -55.469, -80
Slice 177, pass = 0, slice in pass = 178, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -88.4918, 104.531, -80
  point 2: -88.4918, 104.531, 80
  point 3: -88.4918, -55.469, -80
Slice 178, pass = 0, slice in pass = 179, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -89.0918, 104.531, -80
  point 2: -89.0918, 104.531, 80
  point 3: -89.0918, -55.469, -80
Slice 179, pass = 0, slice in pass = 180, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -89.6918, 104.531, -80
  point 2: -89.6918, 104.531, 80
  point 3: -89.6918, -55.469, -80
Slice 180, pass = 0, slice in pass = 181, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -90.2918, 104.531, -80
  point 2: -90.2918, 104.531, 80
  point 3: -90.2918, -55.469, -80
Slice 181, pass = 0, slice in pass = 182, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -90.8918, 104.531, -80
  point 2: -90.8918, 104.531, 80
  point 3: -90.8918, -55.469, -80
Slice 182, pass = 0, slice in pass = 183, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -91.4918, 104.531, -80
  point 2: -91.4918, 104.531, 80
  point 3: -91.4918, -55.469, -80
Slice 183, pass = 0, slice in pass = 184, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -92.0918, 104.531, -80
  point 2: -92.0918, 104.531, 80
  point 3: -92.0918, -55.469, -80
Slice 184, pass = 0, slice in pass = 185, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -92.6918, 104.531, -80
  point 2: -92.6918, 104.531, 80
  point 3: -92.6918, -55.469, -80
Slice 185, pass = 0, slice in pass = 186, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -93.2918, 104.531, -80
  point 2: -93.2918, 104.531, 80
  point 3: -93.2918, -55.469, -80
Slice 186, pass = 0, slice in pass = 187, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -93.8918, 104.531, -80
  point 2: -93.8918, 104.531, 80
  point 3: -93.8918, -55.469, -80
Slice 187, pass = 0, slice in pass = 188, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -94.4918, 104.531, -80
  point 2: -94.4918, 104.531, 80
  point 3: -94.4918, -55.469, -80
Slice 188, pass = 0, slice in pass = 189, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -95.0918, 104.531, -80
  point 2: -95.0918, 104.531, 80
  point 3: -95.0918, -55.469, -80
Slice 189, pass = 0, slice in pass = 190, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -95.6918, 104.531, -80
  point 2: -95.6918, 104.531, 80
  point 3: -95.6918, -55.469, -80
Slice 190, pass = 0, slice in pass = 191, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -96.2918, 104.531, -80
  point 2: -96.2918, 104.531, 80
  point 3: -96.2918, -55.469, -80
Slice 191, pass = 0, slice in pass = 192, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -96.8918, 104.531, -80
  point 2: -96.8918, 104.531, 80
  point 3: -96.8918, -55.469, -80
Slice 192, pass = 0, slice in pass = 193, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -97.4918, 104.531, -80
  point 2: -97.4918, 104.531, 80
  point 3: -97.4918, -55.469, -80
Slice 193, pass = 0, slice in pass = 194, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -98.0918, 104.531, -80
  point 2: -98.0918, 104.531, 80
  point 3: -98.0918, -55.469, -80
Slice 194, pass = 0, slice in pass = 195, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -98.6918, 104.531, -80
  point 2: -98.6918, 104.531, 80
  point 3: -98.6918, -55.469, -80
Slice 195, pass = 0, slice in pass = 196, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -99.2918, 104.531, -80
  point 2: -99.2918, 104.531, 80
  point 3: -99.2918, -55.469, -80
Slice 196, pass = 0, slice in pass = 197, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -99.8918, 104.531, -80
  point 2: -99.8918, 104.531, 80
  point 3: -99.8918, -55.469, -80
Slice 197, pass = 0, slice in pass = 198, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -100.492, 104.531, -80
  point 2: -100.492, 104.531, 80
  point 3: -100.492, -55.469, -80
Slice 198, pass = 0, slice in pass = 199, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -101.092, 104.531, -80
  point 2: -101.092, 104.531, 80
  point 3: -101.092, -55.469, -80
Slice 199, pass = 0, slice in pass = 200, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -101.692, 104.531, -80
  point 2: -101.692, 104.531, 80
  point 3: -101.692, -55.469, -80
Slice 200, pass = 0, slice in pass = 201, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -102.292, 104.531, -80
  point 2: -102.292, 104.531, 80
  point 3: -102.292, -55.469, -80
Slice 201, pass = 0, slice in pass = 202, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -102.892, 104.531, -80
  point 2: -102.892, 104.531, 80
  point 3: -102.892, -55.469, -80
Slice 202, pass = 0, slice in pass = 203, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -103.492, 104.531, -80
  point 2: -103.492, 104.531, 80
  point 3: -103.492, -55.469, -80
Slice 203, pass = 0, slice in pass = 204, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -104.092, 104.531, -80
  point 2: -104.092, 104.531, 80
  point 3: -104.092, -55.469, -80
Slice 204, pass = 0, slice in pass = 205, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -104.692, 104.531, -80
  point 2: -104.692, 104.531, 80
  point 3: -104.692, -55.469, -80
Slice 205, pass = 0, slice in pass = 206, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -105.292, 104.531, -80
  point 2: -105.292, 104.531, 80
  point 3: -105.292, -55.469, -80
Slice 206, pass = 0, slice in pass = 207, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -105.892, 104.531, -80
  point 2: -105.892, 104.531, 80
  point 3: -105.892, -55.469, -80
Slice 207, pass = 0, slice in pass = 208, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -106.492, 104.531, -80
  point 2: -106.492, 104.531, 80
  point 3: -106.492, -55.469, -80
Slice 208, pass = 0, slice in pass = 209, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -107.092, 104.531, -80
  point 2: -107.092, 104.531, 80
  point 3: -107.092, -55.469, -80
Slice 209, pass = 0, slice in pass = 210, transpose = 0, rotation = 0, coilConfigUID = 0
  point 1: -107.692, 104.531, -80
  point 2: -107.692, 104.531, 80
  point 3: -107.692, -55.469, -80

...........PRESCAN_HEADER..................
Offset to/size of PRESCAN_HEADER: 141320, 1500
...PS internal use only (variable "command"): 0
...PS MPS R1 setting 1 - 7: 10
...PS MPS R2 setting 1 - 30: 29
...PS MPS Transmit gain setting 0 - 200: 141
...PS MPS Center frequency Hz: 1277244460
...PS APS R1 setting 1 - 7: 10
...PS APS R2 setting 1 - 30: 29
...PS APS Transmit gain setting 0 - 200: 141
...PS APS Center frequency Hz: 1277244460
...PS rational scaling (variable "scalei"): 0.000995051
...PS unused (variable "scaleq"): 0
...PS noise test 0=16 1=32 bits 0, 1: 135522645
...PS prescan order logic (0-5): 2
...PS bit mask 4 bits: 0
...PS powerspec: 
...PS filler1: 0
...PS filler2: 0
...PS xshim: -11
...PS yshim: -9
...PS zshim: -3
...PS recon enable: 0
...Autoshim successful (1), autoshim failed/smart/OFF (0): 1
...PS mean +/- std noise each receiver: 
 rec[0]: 1 +/- 3.60811 (14.4481%)
 rec[1]: 1 +/- 4.21837 (10.5702%)
 rec[2]: 1 +/- 3.55067 (14.9194%)
 rec[3]: 1 +/- 3.84754 (12.7059%)
 rec[4]: 1 +/- 4.13027 (11.0259%)
 rec[5]: 1 +/- 4.04658 (11.4867%)
 rec[6]: 1 +/- 3.85572 (12.6521%)
 rec[7]: 1 +/- 3.92783 (12.1918%)
...Spectro PS line width: -999
...Spectro PS water suppression flip angle: -999
...Spectro PS water suppression level: -999
...Smart prescan: 2
...Smart prescan string: TG/s1

			15x fields
...Variable "phase_correction_status": 0

			20x fields
...Variable "psc_ta": 69
...Variable "broad_band_select": 1

...........ExamData Type..................
Offset to/size of ExamData section: 142820, 1960
...Exam number: 1
...Exam description: MRI LE Joint w/o Contrast Right
...Exam date/time stamp: (1321988809) Tue Nov 22 11:06:49 2011
...Start time (secs) of first axial in exam: 0
...Cell number at theta: 0
...Cell spacing: 0
...Distance from source to detector: 0
...Distance from source to iso: 0
...Indicates number of updates to header: 0
...Exam complete flag: 0
...Last series number used: 4
...Number of series archived: 0
...Number of series existing: 4
...Number of unstored series: 0
...Number of unarchived series: 4
...Number of prospective/scout series: 4
...Last model number used: 0
...Number of 3D models: 0
...Number of cells in detector: 0
...Magnet strength (in Gauss): 30000
...Patient weight: 36290
...Date/Time of last change: Tue Nov 22 11:06:49 2011
...The make-unique flag: 0
...Detector type: 0
...Tube type: 0
...DAS type: 0
...Number of decon kernels: 0
...Number of elements in a decon kernel: 0
...Decon kernel density: 0
...Decon kernel stepsize: 0
...Decon kernel shift count: 0
...Patient age (years, months or days): 0
...Patient age notation: 0
...Patient sex: 0
...Exam format: 6
...Trauma flag: 0
...Non-zero indicates protocol exam: 1
...Study has complete info (DICOM/genesis): 0
...Patient History: 
...Referring physician: 
...Diagnostician/Radiologist: 
...Operator: 
...Exam type: MR
...Creator suite and host: CHMR3T
...Process that allocated this record: MRIFCCALLOC
...Disk ID for this exam: 
...Hospital name: LUCILE PACKARD CHILDRENS 3T
...Suite ID for this exam: CHMR
...Genesis version - created: 23
...Genesis version - now: 23
...Unique system ID: 00000415723CHMR2
...Unique service ID: 
...Mobile location number: 9999
...Study entity unique ID: 1.2.840.113619.2.182.10251875122564.1322016134.1028770 
...Ref SOP class UID:  
...Ref SOP instance UID:  
...Patient name (FF): 
...Patient ID (FF): 
...Requisition number (FF): 
...Date of birth: 19000101
...Genesis exam UID: 1.2.840.113619.2.182.10251875122564.1322016134.1028770 
...Genesis exam number: 

...........SeriesData Type..................
Offset to/size of SeriesData section: 144780, 2560
...Exam number: 1
...Series number: 4
...Series description: Sag PD FS acc 2.4 etl 37 VD4x
...Allocation series data/time stamp: Tue Nov 22 11:19:36 2011
...Actual series data/time stamp: Tue Nov 22 11:19:36 2011
...PixelData size - as stored: 0
...PixelData size - compressed: 0
...PixelData size - uncompressed: 0
...Horizontal landmark: 682.5
...First scan location (L/S): -16.5081
...Last scan location (L/S): 106.492
...RAS letter for first scan location (L/S): L
...RAS letter for last scan location (L/S): R
...Series complete flag: 0
...Number of images archived: 0
...Last image number used: 206
...Number of images existing: 206
...Indicates number of updates to header: 0
...Number of unstored images: 206
...Number of unarchived images: 206
...Patient position: 1
...Patient entry: 2
...Landmark counter: 0
...Date/Time of last change: Tue Nov 22 11:19:36 2011
...Echo 1 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 2 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 3 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 4 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 5 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 6 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 7 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 8 alpha, beta, window, level values: 0, 0, 0, 0
...Series type: 1
...Series from which prescribed: 0
...Most-like plane (for L/S): 4
...Scout or axial (for CT): 0
...The make-unique flag: 0
...Non-zero if > 0 image used contrast(L/S): 0
...Last pulse sequence used (L/S): 2
...Image sort order (L/S): 0
...Number of acquisitions: 1
...Starting number for baselines: 0
...Ending number for baselines: 0
...Starting number for enhanced scans: 0
...Ending number for enhanced scans: 0
...Table position for nMR and iMR: 0
...nMR - swing angle: 0
...nMR - lateral offset: 0
...Gradient coil selection: 0
...Genesis version - created: 23
...Genesis version - now: 23
...Suite ID for this series: CHMR
...Process that allocated this record: MRIFCCALLOC
...Disk ID for this series: 
...Primary receiver suite and host: CHMR3T
...Archiver suite and host: 
...Anatomical reference: 
...Scan protocol name: KNEE 2011.08
...Series entity unique ID: 1.2.840.113619.2.283.6945.140762.28384.1321972959.365 
...Landmark unique ID: 1.2.840.113619.2.283.6945.140762.28384.1321972959.362 
...Equipment unique ID: 1.2.840.113619.1.283.5.6945.140762 
...Ref SOP class UID:  
...Ref SOP instance UID:  
...Sched proc action item seq - value: 
...Sched proc action item seq - description: 
...Sched proc action item seq - meaning: 
...Sched proc step desc: 
...Sched proc step ID 1: 
...Req proc step ID 1: 
...PPS ID: 
...PPS description: 
...Req proc step ID 2: 
...Req proc step ID 3: 
...Sched proc step ID 2: 
...Sched proc step ID 3: 
...Dicom reference images (4 UIDS): 
   (0):  
   (1):  
   (2):  
   (3):  

			11x fields
...fMRI ExpType: 0
...fMRI TrRest: 0
...fMRI TrActive: 0
...fMRI DumAcq: 0
...fMRI ExptTimePts: 0
...Supplement to se_typ, see DICOM (0008,0008): 0
...fMRI BWRT: 0
...fMRI PdgmStr:                                                                 
...fMRI PdgmDesc:                                                                                                                                                                                                                                                                 
...fMRI PdgmUID:  
...fMRI ApplName:                 
...fMRI ApplVer:                 

			12x fields
...Asset calibration series number: -1
...Asset calibration scan number: 0
...Product/Research/Service: 2
...Pure calibration series number: 0
...Pure calibration scan number: 0
...Asset application name:             
...Scic_a values from CoilConfig.cfg: 0                               
...Scic_s values from CoilConfig.cfg: 0                               
...Scic_c values from CoilConfig.cfg: 0                               
...PURE config parameters from pure.cfg: rev=1;a=75;b=2;c=32;d=8;e=3;f=2;g=1;h=0                         

			15x fields
...(IDEAL) water, fat, in-phase, and out-phase: 0

...........MRImgData Type..................
Offset to/size of MRImgData section: 147340, 2448
...Exam number for this image: 1
...Series number for this image: 4
...Image number: 1
...Actual image date/time stamp: Tue Nov 22 11:19:36 2011
...Allocation image date/time stamp: Tue Nov 22 11:19:36 2011
...Raw data run number: 49666
...Display field of view - x (mm): 160
...Display field of view - y (if different): 144
...Image matrix size - x: 512
...Image matrix size - y: 512
...Image dimension - x: 320
...Image dimension - y: 320
...Image pixel size - x: 0.3125
...Image pixel size - y: 0.3125
...Variable bandwidth (kHz): 62.5
...Pulse repetition time (usec): 1400000
...Pulse echo time (usec): 20827
...Second echo time (usec): 0
...Echo train length for fast spin echo: 37
...Fractional echo - effective TE flag: 2
...Pulse inversion time (usec): 0
...Flip angle for GRASS scans (deg): 90
...Number of echoes: 1
...Echo number: 1
...Variable echo flag: 0
...Number of slices in this scan group: 206
...Slice thickness (mm): 0.6
...Spacing between scans (mm): 0
...Negative scan spacing for overlap slices: 0
...Continuous slices flag: 0
...Slice thickness (variable 'thk_disclmr'): 0
...Number of 3D slabs: 1
...Slice locations per 3D slab: 210
...Number of slice locs on each slab which overlap neighbors: 0
...Frequency direction: 2 (up/down)
...Swap phase/frequency axis: 0
...Slice offsets on frequency axis: 0
...Number of excitations: 1
...Duration of scan: 3.19988e+08
...Magnitude, phase, imaginary, or real: 0
...Plane type: 4
...Oblique plane: 4
...Scout type (A-P or lateral): 0
...Graphically prescribed: 0
...Series from which prescribed: 1
...Image from which prescribed: 18
...Image location: -16.5081
...RAS letter of image location: L
...(R,A,S) center coordinate of image: (-16.5081, 24.531, -4.92859)
...(R,A,S) normal coordinate: (1, 0, 0)
...(R,A,S) coordinate of top left hand corner: (-16.5081, 104.531, 75.0714)
...(R,A,S) coordinate of top right hand corner: (-16.5081, -55.469, 75.0714)
...(R,A,S) coordinate of bottom right hand corner: (-16.5081, -55.469, -84.9286)
...Imaging mode: 9
...Imaging options: ST ED (1073743904)
...Imaging option 2: 1075838976
...Imaging option 3: 64
...Table delta: 0
...Pulse sequence: 2
...Pulse sequence mode: 0
...Pulse sequence name: cubearc_pds
...PSD creation date and time: Mon Nov 14 11:52:12 2011
...PSD name from inside PSD: 3DFSE
...Type of receiver used: 1
...Coil type: 1
...Coil name: HD TR Knee PA
...Surface coil type: 0
...Extremity coil flag: 0
...Surface coil intensity correction flag: 0
...IV contrast agent: 
...Oral contrast agent: 
...Image contrast mode: 0
...Cardiac repetition time: 0
...Cardiac heart rate (bpm): 63
...Trigger window (% of RR interval): 0
...Images per cardiac cycle: 0
...Cardiac phase number: 0
...Total number of cardiac phases prescribed: 0
...Tagging flip angle: 0
...Cardiac tagging orientation: 0
...Tag type: 0
...Tag space: 0
...Blood suppression TI: 0
...Delay time after trigger (msec): 0
...Minimum delay after trigger (usec): 0
...Fast CINE interpolation method: 0
...Fast CINE normalization type: 0
...Views per segment: 0
...Respiratory rate (breaths per min): 0
...Respiratory trigger point as percent of maximum: 0
...Respiratory trigger window: 0
...Number of fast phases: 0
...Number of EPI shots: 1
...Effective echo spacing for EPI: 0
...Diffusion direction for DW-EPI: 0
...B-value for DW-EPI: 1000
...Average SAR: 0.0525815
...Peak SAR: 2.29351
...Average head SAR: 1.14676
...Bitmap defining user CVs: 32509986
...User usage tag ("defines how user CVs are filled in"): 0
...What process fills in the user CVs, ifcc or TIR ('user_fill_mapMSW'): 0
...What process fills in the user CVs, ifcc or TIR ('user_fill_mapLSW'): 0
...User variable 0: 1
...User variable 1: 0
...User variable 2: 0
...User variable 3: 0
...User variable 4: 0
...User variable 5: 0.75
...User variable 6: 0
...User variable 7: 2
...User variable 8: 0
...User variable 9: 0
...User variable 10: 0
...User variable 11: 0
...User variable 12: 30
...User variable 13: 0
...User variable 14: 0
...User variable 15: 0
...User variable 16: 0
...User variable 17: 0
...User variable 18: 0
...User variable 19: 0
...User variable 20: 4
...User variable 21: 2.4
...User variable 22: 2.4
...User variable 23: 1
...User variable 24: 1
...User variable 25: 0
...User variable 26: 0
...User variable 27: 0
...User variable 28: 0
...User variable 29: 0
...User variable 30: 0
...User variable 31: 4
...User variable 32: 0
...User variable 33: 0
...User variable 34: 0
...User variable 35: 0
...User variable 36: 0
...User variable 37: 0
...User variable 38: 0
...User variable 39: 0
...User variable 40: 0
...User variable 41: 0
...User variable 42: 0
...User variable 43: 0
...User variable 44: 0
...User variable 45: 0
...User variable 46: 0
...User variable 47: 0
...User variable 48: 0
...dBdt peak rate of gradient field change (T/s): 0
...dBdt limit in units of percent of theoretical curve: 100
...PSD estimated dBdt limit in Teslas/sec: 0
...PSD estimated dBdt limit in units of percent: 97.1246
...RTIA timer: 0
...RTIA fps: 0
...RTIA filter mode: 
...Bitmap of SAT selections: 0
...SAT fat/water/none: 5
...Concat sat type flag: 0
...R-side SAT pulse location relative to landmark: 9990
...L-side SAT pulse location relative to landmark: 9990
...A-side SAT pulse location relative to landmark: 9990
...P-side SAT pulse location relative to landmark: 9990
...S-side SAT pulse location relative to landmark: 9990
...I-side SAT pulse location relative to landmark: 9990
...Thickness of x axis SAT pulse: 0
...Thickness of y axis SAT pulse: 0
...Thickness of z axis SAT pulse: 0
...Preparatory pulse option: 0
...Magnitization Transfer offset frequency: 0
...Vascular mode: 0
...Phase contrast flow axis: 0
...Phase contrast velocity encoding: 0
...Scale weighted venc: 0
...Magnitude weighting flag: 2
...Collapse image: 0 (Unknown)
...Projection algorithm: 0
...Projection algorithm name: 
...Projection angle: 0
...X axis rotation: 0
...Y axis rotation: 0
...Z axis rotation: 0
...Pause time: 0
...Pause interval (slices): 0
...Interimage/interloc delay (usec): 0
...Image filtering 0.5/0.2 T: 0
...MR-YMS num_seg: 0
...Number of averages for spectro: 0
...Station index: 0
...Station total: 0
...Calibrated field strength (x10 uGauss): 0
...Scan acquisition number: 1
...GE image integrity: 0
...Identify image as original or unoriginal: 0
...Image complete flag: 0
...Reference image field: 
...Summary image field: 
...Window value: 0
...Level value: 0
...Lower range of pixels 1: 0
...Upper range of pixels 1: 0
...Lower range of pixels 2: 0
...Upper range of pixels 2: 0
...Screen format (8/16 bit): 16
...Image archive flag: 0
...Suite ID for this image: CHMR
...Image unique ID: 1.2.840.113619.2.283.6945.140762.22672.1321973038.103 
...Service obj class unique ID: 1.2.840.10008.5.1.4.1.1.4 
...Make-unique flag: 0
...Disk ID for this image: 
...Image compression type for allocation: 3
...Foreign image revision: 
...Image allocation key: MRIFCCALLOC
...Date/time of last change: Tue Nov 22 11:19:36 2011
...Genesis version - created: 23
...Genesis version - now: 23
...Pixel data ID: 
...Pixel data size - as stored: 0
...Pixel data size - compressed: 0
...Pixel data size - uncompressed: 0
...String slop field 2: 
...Bitmap of prescan options: 4

			11x fields
...Regressor value: 0
...Delay after acquisition (MP/fMRI screen): 0

			12x fields
...Slice asset in ASSET screen: 1
...Phase asset in ASSET screen: 1
...Corresponding 4 SAR values for defined terms: [0.0525815, 2.29351, 1.14676, 1.14676]
...SAR control mode (normal, 1st or 2nd): 1
...Variable 'sarDefinition': defined terms available: 15
...Shim FOV (2 terms): [0, 0]
...Shim (R,A,S) center (2 terms): [0, 0, 0], [0, 0, 0]
...dBdt control mode (normal, 1st or 2nd): 1
...Governing body MHW/IEC/FDA: 1
...Variable: 'no_shimvol': 0
...Variable: 'shim_vol_type': 0
...Variable: 'xml_psc_shm_vol':                                 
...GE coil name: C-GE_HDx TR Knee PA     
...Concatenated string of coilcode and chip serialID: 
                                                                                                         
...ASSET calibration series UID:  
...PURE calibration series UID:  

			14x fields
...fMRI: RXM blob size: 0
...fMRI: RXM blob size padding: 0
...Current phase for this image (DP): 0
...Acoustic reduction level: 0
...Slice group number (0 = no groups, 1 = 1st group, etc.: 1
...Number of slice groups (0 = no groups, 1 = 1st group, etc.: 1
...Display image in auto view: 1
...Variable: rxmpath: 
...Pulse sequence name annotation: Cube

			15x fields
...Slice number in group: 0 = no image, 1 = 1st image, etc.: 3

			16x/20x fields
...AutoSubParam struct: [0, 0, 0, 0, 0, 0]
...Imaged Nucleus 1H=>Hydrogen, 13C=>carbon, 23NA=>Sodium, etc: 1

			22x fields
...MRE temporal phases: 0
...MEG frequency: 0
...MRE driver amplitude: 0
...MRE driver cycle per trigger: 0
...MEG direction: 4
...Duration of label or control pulse for 3D ASL...: 0
