This looks like a LittleEndian/22x/raw file...
Total file size should be: 4345579804
Header size: 149788

...........RDB_HEADER_REC..................
Offset to/size of RDB_HEADER_REC: 0, 4096
...RDBM revision number: 20.006
...Rdy pkt run number: 48640
...Rdy pkt sequence number: 95
...Rdy pkt run number in char: 48640
...Scan date: 05/16/111
...Scan time: 16:58
...Logo, used to verify file: INVALIDNMR
...Data type 0=emp 1=nrec 2=rw: 1
...unused: 0
...rhdacqctrl bit mask: 8
...rhrcctrl bit mask: 1
...rhexecctrl bit mask: 11
...scan type bit mask: 16
...rhtype bit mask: 2113
...rhformat bit mask: 16388
...rhrecon proc-a-son recon: 30
...rhdatacq proc-a-son dacq: 0
...rhnpasses passes for a scan: 1
...rhnpomp pomp group slices: 1
...rhnslices slices in a pass: 344
...rhnecho echoes of a slice: 1
...rhnavs number of excitations: 1
...rhnframes yres: 256
...rhbline baselines: 0
...rhhnover overscans: 0
...rhfrsize xres: 192
...rhptsize: 4
...rhvquant 3D volumes: 1
...RX cine heart phases: 1
...RX cine TR in sec: 0.00428
...RX cine RR in sec: 0.372671
...rhinitpass allocate passes: 1
...rhincrpass tps autopauses: 1
...rhmethod 0=recon, 1=psd: 1
...rhdaxres: 192
...rhdayres: 257
...rhrcxres: 512
...rhrcyres: 512
...rhimsize: 512
...RC Z res (power of 2 > rhnslices): 0
...rhrawsize: 4345430016
...rhsspsave: 0
...rhudasave: 0
...rhfermr fermi radius: 160
...rhfermw fermi width: 10
...rhferme fermi eccentricity: 1.25
...rhclipmin 4x IP limit: 0
...rhclipmax 4x IP limit: 16383
...rhdoffset default offset: 0
...rhxoff scroll img in x: 0
...rhyoff scroll img in y: 0
...rhnwin hecho window width: 8
...rhntran hecho trans width: 4
...PS rhscalei: 0.0010793
...PS rhscaleq: 0
...RX rotation (0 90 180 270 deg): 1
...RX transpose (0, n/y transpose): 3
...rhblank zero image views: 0
...rhslblank slice blank 3D: 0
...RX Gradient coil (0=off 1=Schnk 2=Rmr): 0
...rhddaover unused: 0
...SARR bit mask 15 bits: 0
...SARR feeder timing info: 0
...SARR feeder timing info: 0
...SARR control of feeder: 0
...SARR df decimation ratio: 0
...SARR which feeder algorithm: 0
...rhdab0s rhdab0e start, stop receiver: 
   recs[0]: 0, rece[0]: 31
   recs[1]: 0, rece[1]: 0
   recs[2]: 0, rece[2]: 0
   recs[3]: 0, rece[3]: 0
...rhuser0: 1.31149
...rhuser1: 1.17188
...rhuser2: 344
...rhuser3: 67111
...rhuser4: 2
...rhuser5: 1
...rhuser6: 1
...rhuser7: 2.39891e+07
...rhuser8: 0
...rhuser9: 0
...rhuser10: 192
...rhuser11: 0
...rhuser12: 0
...rhuser13: 0
...rhuser14: 0
...rhuser15: 0
...rhuser16: 0
...rhuser17: 0
...rhuser18: 0
...rhuser19: 0
...rhuser20: 0
...rhuser21: 0
...rhuser22: 0
...rhuser23: 0
...rhuser24: 0
...rhuser25: 0
...rhuser26: 0
...rhuser27: 0
...rhuser28: 0
...rhuser29: 0
...rhuser30: 0
...rhuser31: 0
...rhuser32: 0
...rhuser33: 0
...rhuser34: 0
...rhuser35: 0
...rhuser36: 0
...rhuser37: 0
...rhuser38: 0
...rhuser39: 0
...rhuser40: 0
...rhuser41: 0
...rhuser42: 0
...rhuser43: 0
...rhuser44: 0
...rhuser45: 0
...rhuser46: 0
...rhuser47: 0
...rhuser48: 0
...rhvtype bit mask 31 bits: 0
...RX x flow direction control: 0
...RX x flow direction control: 0
...RX x flow direction control: 0
...RX x flow direction control: 0
...RX y flow direction control: 0
...RX y flow direction control: 0
...RX y flow direction control: 0
...RX y flow direction control: 0
...RX z flow direction control: 0
...RX z flow direction control: 0
...RX z flow direction control: 0
...RX z flow direction control: 0
...RX weight for magnitude image 1: 0
...RX weight for magnitude image 2: 0
...RX weight for magnitude image 3: 0
...RX weight for magnitude image 4: 0
...RX velocity encoding cm/sec: 0
...Specwidth filter width kHz: 0
...Spectro CSI dims: 0
...rhspecrescsix: 0
...rhspecrescsiy: 0
...rhspecrescsiz: 0
...RX x CSI volume dimension: 0
...RX y CSI volume dimension: 0
...RX z CSI volume dimension: 0
...RX x CSI volume center: 0
...RX y CSI volume center: 0
...RX z CSI volume center: 0
...Number of dwell periods for spectro: 1
...PS internal use only: 0
...PS MPS R1 setting (1-7): 7
...PS MPS R2 setting (1-30): 29
...PS MPS transmit gain setting (0-200): 116
...PS MPS center frequency Hz: 1277245260
...PS APS R1 setting (1-7): 7
...PS APS R2 setting (1-30): 29
...PS APS transmit gain setting (0-200): 116
...PS APS center frequency Hz: 1277245260
...PS rational scaling: 0
...PS unused: 0
...PS noise test 0=16 1=32 bits: 135522645
...PS prescan order logic: 2
...PS bit mask 4 bits: 0
...PS powerspec: 
...PS filler1: 0
...PS filler2: 0
...Spectro full, half echo 0, 1: 0
...Variable "im_size_y": 0
...rhtype1 data_collect_type 1 bit mask: 262145
...rhfreqscale freq_scale k-space step: 1
...rhphasescale phase_scale k-space step: 0.8

			8x fields
...rhovl - overlaps for MOTSA: 0
...Linear Corr. 0:off, 1:linear, 2:polynomial: 0
...Fit number of points: 0
...Fit order: 2
...Linear phase correction average 0:off, 1:on: 0
...Const Corr. 0:off, 1:ky spec., 2:polyfit(2/ilv), 3:polyfit(1/ilv): 0
...Fit number of points: 2
...Fit order: 2
...External correction file 0:don't use, 1: use: 0
...Phase correction coef. image 0:off, 1:linear & constant: 1
...Interleaves to use for correction: 0=all, 1=only first: 0
...Bestky view for fractional ky scan: 0
...Phase correction research control: 0
...Phase correction threshold points: 2
...Phase correction beginning point to discard: 0
...Phase correction middle point to discard: 0
...Phase correction ending point to discard: 0
...Threshold percentage: 15
...Spacial best reference scan index: 0
...Temporal best reference scan index: 0
...Spare for phase correction: 1
...Number of interleaves: 1
...Ky traversal direction 0: top-down, 1:center-out: 0
...Alternate read sign 0=no, 1=odd/even, 2=pairs: 0
...Number of scan repetitions: 1
...Reference scan 0: off 1: on: 1
...Constant S term normalization factor: 0
...Constant polyfit weighting factor: 0
...Linear S term normalization factor: 0
...Linear polyfit weighting factor: 0
...Best ky location: 64
...Control word for VRG filter: 0
...Control word for VRGF final X resolution: 192
...Control word for bandpass asymmetry: 0
...Starting frequency: 0
...Ending frequency: 0
...Number of iterations used in homodyne processing: 1
...0: Fast receiver off, 1 - 5: LPF settings: 0
...Total number of frames for reference scan: 0
...Number of frames per pass for a reference scan: 0
...Total number of frames for an entire scan: 0
...Number of frames per pass: 0
...Spectro - user usage tag: 0
...Spectro - fillmapMSW: 0
...Spectro - fillmapLSW: 0
...Adjust view indexes, if set so bestky view = 0: 1
...First view within an echo group used for fit: 0
...Last view within an echo group used for fit: 0
...If = 1, force pts from other egrps to be used: 0
...If = 2, force slope to be set to pclinslope: 1
...If = 2, force slope to be set to pcconslope: 1
...Value to set linear slope to if forced: 0
...Value to set constant slope to if forced: 0
...If 1,2,3,4, use that coil's results for all: 1
...Variable view sharing mode: 0
...Number of original images: 0
...TR in microseconds: 0
...Gender: male or female: 0
...Slice ZIP factor: 0=off, 2, or 4: 2
...Coefficient A for flow image 1: 0
...Coefficient B for flow image 1: 0
...Coefficient C for flow image 1: 0
...Coefficient D for flow image 1: 0
...Coefficient A for flow image 2: 0
...Coefficient B for flow image 2: 0
...Coefficient C for flow image 2: 0
...Coefficient D for flow image 2: 0
...Coefficient A for flow image 3: 0
...Coefficient B for flow image 3: 0
...Coefficient C for flow image 3: 0
...Coefficient D for flow image 3: 0
...System utility control variable: 0
...EPI II diffusion control cv: 0
...Arrhythmia rejection window (percentage): 10
...Views per segment for FastCine: 8
...N-coil recon map: 0
...TE for first echo: 976
...TE for second and later echoes: 50000
...BW for navigator frames: 4
...Control flag for dfm (0=off, other=on): 0
...Uncombined NEX at start of recon: 1
...Max navigator frames in a pass: 1
...Xres of navigator frames: 32
...Point size of navigator frames: 2
...Number of navigators per frame (tag table): 1
...Control flag for dfm debug: 0
...Threshold for navigator correction: 0
...Bit settings controlling gridding: 4254
...B0 map enable and map size: 512
...TE difference between b0 map arms: 0
...Flag to apply motion compensation: 0
...Variable density transition: 0
...Variable density transition: 0
...Max gradient amplitude: 0
...Max slew rate: 0
...RX scan field of view: 300
...A to D sample time microsecs: 8
...Change factor for variable density: 0
...RX display field of view: 300

			9x fields
...Auto-Ncoil FOV: 300
...MFO FIESTA recon control: 0
...Auto post-processing opcode: 0
...Auto-Ncoil select: 0
...Auto-Ncoil limit: 45
...Auto post processing options: 0
...Gradient mode in Gemini project: 0
...Asset: 11
...Asset calibration threshold: 10000
...Asset R: 0.5
...Asset coil number: 253301
...Asset phases: 1
...Table position: -6.11285
...Patient position: 1
...Patient entry: 2
...Landmark: 1146.8

			11x fields
...For fat and water dual recon: 0
...Number of passes stored in a multi-pass Pfile (0 means 1 pass): 0
...Last slice number: 0
...Slice reduction factor: 1
...Asset slab wrap: 0
...Coefficient for amount of phase correction: 0.5
...Navigator echo correction: 0
...Number of views of navigator echoes: 0
...Number of navigator echoes for actual correction: 2
...Start view for phase correction process: 1
...End view for phase correction process: 1
...Start shot for delta phase estimation in nav echoes: 1
...End shot for delta phase estimation in nav echoes: 2
...0 = modified Hanning, 1 = modified Tukey: 0
...Degree of apodization; 0.0 = boxcar, 1.0=hanning: 0.1
...Apodization at ends, 0.0 = max, 1.0 = boxcar: 0
...Surface coil intensity correction: 1 if enabled: 0
...Type of Clariview/name of filter: 0
...Edge parameters for enhanced recon: 0
...Smooth parameters for enhanced recon: 0
...Focus parameters for enhanced recon: 0
...Edge parameters for Clariview: 0
...Smooth parameters for Clariview: 0
...Focus parameters for Clariview: 0
...Reduction parameter for SCIC: 0
...Gauss parameter for SCIC: 0
...Threshold parameter for SCIC: 0
...Total Number of regions acquired by PSD: 0
...Total Number of input regions for reordering: 0
...Header field for smart prescan: 2
...K-space blanking field, left: 0
...K-space blanking field, right: 0
...Multi-exciter acquire type information from CV: 0
...Retrosective FSE phase correction control flag: 0
...Added for retrospective FSE phase correction: 0

			12x fields
...1st view to use for dynamic EPI phase correction: 0
...Last view to use for dynamic EPI phase correction: 0
...Number of passes to skip for dynamic EPI phase correction: 0
...Number of extra frames at top of k-space: 0
...Number of extra frames at bottom of k-space: 0
...Multiphase type 0 = interleaved, 1 = sequential: 0
...Number of phases in a multiphase scan: 1
...PURE flag from psd: 0
...Rec scale factor ratio for calibration scan: 0
...Byte offset to start of raw data (i.e size of POOL_HEADER): 149788
...Byte offset to start of rdb_hdr_per_pass of POOL_HEADER: 4096
...Byte offset to start of rdb_hdr_unlock_raw of POOL_HEADER: 20480
...Byte offset to start of rdb_hdr_data_acq_tab of POOL_HEADER: 36864
...Byte offset to start of rdb_hdr_nex_tab of POOL_HEADER: 135168
...Byte offset to start of rdb_hdr_nex_abort_tab of POOL_HEADER: 137220
...Byte offset to start of rdb_hdr_tool of POOL_HEADER: 139272
...Byte offset to start of rdb_hdr_exam of POOL_HEADER: 142820
...Byte offset to start of rdb_hdr_series of POOL_HEADER: 144780
...Byte offset to start of rdb_hdr_image of POOL_HEADER: 147340
...Byte offset to start of rdb_hdr_ps of POOL_HEADER: 141320
...spare b: 0
...New WW/WL algo enable/disable flag: 0
...Image area %: 60
...Histogram area top: 1
...Histogram area bottom: 1
...PURE noise reduction on=1/off=0: 1
...PURE cfg file value, filter: 1
...PURE cfg file value, fit_order: 2
...PURE cfg file value, kernelsize_z: 3
...PURE cfg file value, kernelsize_xy: 8
...PURE cfg file value, weight_radius: 32
...PURE cfg file value, intensity_scale: 2
...PURE cfg file value, noise_threshold: 75
...MART deblurring kernel, wienera: 0
...MART deblurring kernel, wienerb: 0
...MART deblurring kernel, wienert2: 0
...MART deblurring kernel, wieneresp: 0
...MART deblurring kernel, wiener: 0
...MART deblurring kernel, flipfilter: 0
...MART deblurring kernel, dbgrecon: 0
...MART deblurring kernel, ech2skip: 0
...Tricks type 0 = subtracted, 1 = unsubtracted: 0
...LC fiesta phase: 0
...LC fiesta: 0
...Half echo raw data filter, herawflt: 0
...Half echo raw data filter, herawflt_befnwin: 1
...Half echo raw data filter, herawflt_befntran: 2
...Half echo raw data filter, herawflt_befamp: 1
...Half echo raw data filter, herawflt_hpfamp: 1
...Half echo over-sampling: 0
...PURE Correction threshold: 0

			14x fields
...SWIFT enable/disable flag: 0
...Number of slabs to be used by TRICKS: 1
...Number of coils to SWIFT between: 0
...autoshim successful (1), autoshim failed/smart/OFF (0): 0
...Number of phases for dynamic plan: 0

			15x fields
...MEDAL configuration bitmask: 0
...MEDAL pixel stack size: 54
...MEDAL in-phase, out-of-phase order: 0
...MEDAL max adaptive region growing kernel size: 15
...MEDAL min adaptive region growing kernel size: 8
...MEDAL field smoothing kernel size: 8
...MEDAL 2D region growing start slice: 0
...MEDAL 2D region growing end slice: 10
...IDEAL enable/disable flag: 0
...IDEAL image options and control bits: 0
...IDEAL delta frequency between two species : 3199.9
...IDEAL bandwidth in Hz: 62.5
...IDEAL first echo time in ms: 0.976
...IDEAL echo spacing in ms: 0.10417
...IDEAL "This will give the number of extra points": 32
...Set to 1 for VIBRANT scans: 0
...Set to 1 for torso scans (ASSET): 0
...Set to 1 to use reapodized cal (ASSET): 0
...Unique ID for kacq_yz.txt files: 67111
...Set to 1 for local Tx phased arrays: 0
...Used to scale 3D acqs to avoid over-range: 1
...Scanner mode: 1 = Product, 2 = Research, 3 = Service: 2

			20x fields
...Channel translation table entry type: 
   Entry 0:
    The logicalCoilName of the active coil: RL-RM:32chPedTorso
    The clinicalCoilName of the active coil: C-RM:32chPedTorso
    A unique identifier based on coil parameters: 8590187893
    The coilConnector to which the active coil is connected: 562954248388609
    Indicates whether this config is used for active scanning: 5066622595497987
    The channel translation map for this config: 19, 20, 13, 14, 15, 16, 29, 30, 31, 32, 9, 10, 11, 12, 25, 26, 27, 28, 5, 6, 7, 8, 21, 22, 23, 24, 0, 0, 0, 0, 0, 0
...The variable rdb_hdr_psc_ta: 123
...rhdiskacqctrl control: 0
...Set to 1 for broadband exciter, 0 for narrowband exciter: 1

			16x/22x fields
...Total number of B values for Multi-B DWI: 1
...Number of diffusion directions: 1: Single, 3: Three, 4: Tetrahedral: 1
...Image-based NEX number for T2 (Smart nex): 1
...NEX number for each b-value in multi-B eDWI: 
    NEX = 1 (table entry 0)
    NEX = 2 (table entry 1)
    NEX = 4 (table entry 2)
    NEX = 6 (table entry 3)
    NEX = 8 (table entry 4)
    NEX = 12846 (table entry 5)
    NEX = 13112 (table entry 6)
    NEX = 13870 (table entry 7)
    NEX = 13369 (table entry 8)
    NEX = 11829 (table entry 9)
    NEX = 13361 (table entry 10)
    NEX = 14128 (table entry 11)
    NEX = 12854 (table entry 12)
    NEX = 12590 (table entry 13)
    NEX = 13367 (table entry 14)
    NEX = 12848 (table entry 15)
    NEX = 12590 (table entry 16)
    NEX = 12339 (table entry 17)
    NEX = 13621 (table entry 18)
    NEX = 13109 (table entry 19)
    NEX = 13875 (table entry 20)
    NEX = 11827 (table entry 21)
    NEX = 12850 (table entry 22)
    NEX = 53 (table entry 23)
    NEX = 12846 (table entry 24)
    NEX = 14382 (table entry 25)
    NEX = 12340 (table entry 26)
    NEX = 12590 (table entry 27)
    NEX = 13105 (table entry 28)
    NEX = 12598 (table entry 29)
    NEX = 12846 (table entry 30)
    NEX = 14382 (table entry 31)
    NEX = 12340 (table entry 32)
    NEX = 12590 (table entry 33)
    NEX = 13105 (table entry 34)
    NEX = 12598 (table entry 35)
    NEX = 11833 (table entry 36)
    NEX = 11826 (table entry 37)
    NEX = 14386 (table entry 38)
    NEX = 11827 (table entry 39)
    NEX = 14646 (table entry 40)
    NEX = 13620 (table entry 41)
    NEX = 12590 (table entry 42)
    NEX = 12340 (table entry 43)
    NEX = 13879 (table entry 44)
    NEX = 11826 (table entry 45)
    NEX = 14129 (table entry 46)
    NEX = 12340 (table entry 47)
    NEX = 11826 (table entry 48)
    NEX = 13105 (table entry 49)
    NEX = 13616 (table entry 50)
    NEX = 13621 (table entry 51)
    NEX = 13107 (table entry 52)
    NEX = 13110 (table entry 53)
    NEX = 12846 (table entry 54)
    NEX = 13874 (table entry 55)
    NEX = 11776 (table entry 56)
    NEX = 11826 (table entry 57)
    NEX = 13368 (table entry 58)
    NEX = 11824 (table entry 59)
    NEX = 12593 (table entry 60)
    NEX = 13875 (table entry 61)
    NEX = 11825 (table entry 62)
    NEX = 11826 (table entry 63)
    NEX = 13368 (table entry 64)
    NEX = 11824 (table entry 65)
    NEX = 12593 (table entry 66)
    NEX = 13875 (table entry 67)
    NEX = 14641 (table entry 68)
    NEX = 12846 (table entry 69)
    NEX = 12846 (table entry 70)
    NEX = 13112 (table entry 71)
    NEX = 13870 (table entry 72)
    NEX = 13369 (table entry 73)
    NEX = 11829 (table entry 74)
    NEX = 13361 (table entry 75)
    NEX = 14128 (table entry 76)
    NEX = 12854 (table entry 77)
    NEX = 12590 (table entry 78)
    NEX = 13367 (table entry 79)
    NEX = 12848 (table entry 80)
    NEX = 12590 (table entry 81)
    NEX = 12339 (table entry 82)
    NEX = 13621 (table entry 83)
    NEX = 13109 (table entry 84)
    NEX = 13875 (table entry 85)
    NEX = 11827 (table entry 86)
    NEX = 12850 (table entry 87)
    NEX = 55 (table entry 88)
    NEX = 12846 (table entry 89)
    NEX = 14382 (table entry 90)
    NEX = 12340 (table entry 91)
    NEX = 12590 (table entry 92)
    NEX = 13105 (table entry 93)
    NEX = 12598 (table entry 94)
    NEX = 12846 (table entry 95)
    NEX = 14382 (table entry 96)
    NEX = 12340 (table entry 97)
    NEX = 12590 (table entry 98)
    NEX = 13105 (table entry 99)
...Sum-of-squares recon (0), Complex channel combine recon (1): 0
...Value of NEX table for unacquired encodes: 1

...........RDB_DATA_ACQ_TAB..................
Offset to/size of RDB_DATA_ACQ_TAB: 36864, 98304
Slice 0, pass = 0, slice in pass = 1, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -99.0846, 150
  point 2: -136.931, -99.0846, -150
  point 3: 163.069, -99.0846, 150
Slice 1, pass = 0, slice in pass = 2, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -98.5846, 150
  point 2: -136.931, -98.5846, -150
  point 3: 163.069, -98.5846, 150
Slice 2, pass = 0, slice in pass = 3, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -98.0846, 150
  point 2: -136.931, -98.0846, -150
  point 3: 163.069, -98.0846, 150
Slice 3, pass = 0, slice in pass = 4, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -97.5846, 150
  point 2: -136.931, -97.5846, -150
  point 3: 163.069, -97.5846, 150
Slice 4, pass = 0, slice in pass = 5, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -97.0846, 150
  point 2: -136.931, -97.0846, -150
  point 3: 163.069, -97.0846, 150
Slice 5, pass = 0, slice in pass = 6, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -96.5846, 150
  point 2: -136.931, -96.5846, -150
  point 3: 163.069, -96.5846, 150
Slice 6, pass = 0, slice in pass = 7, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -96.0846, 150
  point 2: -136.931, -96.0846, -150
  point 3: 163.069, -96.0846, 150
Slice 7, pass = 0, slice in pass = 8, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -95.5846, 150
  point 2: -136.931, -95.5846, -150
  point 3: 163.069, -95.5846, 150
Slice 8, pass = 0, slice in pass = 9, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -95.0846, 150
  point 2: -136.931, -95.0846, -150
  point 3: 163.069, -95.0846, 150
Slice 9, pass = 0, slice in pass = 10, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -94.5846, 150
  point 2: -136.931, -94.5846, -150
  point 3: 163.069, -94.5846, 150
Slice 10, pass = 0, slice in pass = 11, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -94.0846, 150
  point 2: -136.931, -94.0846, -150
  point 3: 163.069, -94.0846, 150
Slice 11, pass = 0, slice in pass = 12, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -93.5846, 150
  point 2: -136.931, -93.5846, -150
  point 3: 163.069, -93.5846, 150
Slice 12, pass = 0, slice in pass = 13, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -93.0846, 150
  point 2: -136.931, -93.0846, -150
  point 3: 163.069, -93.0846, 150
Slice 13, pass = 0, slice in pass = 14, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -92.5846, 150
  point 2: -136.931, -92.5846, -150
  point 3: 163.069, -92.5846, 150
Slice 14, pass = 0, slice in pass = 15, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -92.0846, 150
  point 2: -136.931, -92.0846, -150
  point 3: 163.069, -92.0846, 150
Slice 15, pass = 0, slice in pass = 16, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -91.5846, 150
  point 2: -136.931, -91.5846, -150
  point 3: 163.069, -91.5846, 150
Slice 16, pass = 0, slice in pass = 17, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -91.0846, 150
  point 2: -136.931, -91.0846, -150
  point 3: 163.069, -91.0846, 150
Slice 17, pass = 0, slice in pass = 18, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -90.5846, 150
  point 2: -136.931, -90.5846, -150
  point 3: 163.069, -90.5846, 150
Slice 18, pass = 0, slice in pass = 19, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -90.0846, 150
  point 2: -136.931, -90.0846, -150
  point 3: 163.069, -90.0846, 150
Slice 19, pass = 0, slice in pass = 20, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -89.5846, 150
  point 2: -136.931, -89.5846, -150
  point 3: 163.069, -89.5846, 150
Slice 20, pass = 0, slice in pass = 21, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -89.0846, 150
  point 2: -136.931, -89.0846, -150
  point 3: 163.069, -89.0846, 150
Slice 21, pass = 0, slice in pass = 22, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -88.5846, 150
  point 2: -136.931, -88.5846, -150
  point 3: 163.069, -88.5846, 150
Slice 22, pass = 0, slice in pass = 23, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -88.0846, 150
  point 2: -136.931, -88.0846, -150
  point 3: 163.069, -88.0846, 150
Slice 23, pass = 0, slice in pass = 24, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -87.5846, 150
  point 2: -136.931, -87.5846, -150
  point 3: 163.069, -87.5846, 150
Slice 24, pass = 0, slice in pass = 25, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -87.0846, 150
  point 2: -136.931, -87.0846, -150
  point 3: 163.069, -87.0846, 150
Slice 25, pass = 0, slice in pass = 26, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -86.5846, 150
  point 2: -136.931, -86.5846, -150
  point 3: 163.069, -86.5846, 150
Slice 26, pass = 0, slice in pass = 27, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -86.0846, 150
  point 2: -136.931, -86.0846, -150
  point 3: 163.069, -86.0846, 150
Slice 27, pass = 0, slice in pass = 28, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -85.5846, 150
  point 2: -136.931, -85.5846, -150
  point 3: 163.069, -85.5846, 150
Slice 28, pass = 0, slice in pass = 29, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -85.0846, 150
  point 2: -136.931, -85.0846, -150
  point 3: 163.069, -85.0846, 150
Slice 29, pass = 0, slice in pass = 30, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -84.5846, 150
  point 2: -136.931, -84.5846, -150
  point 3: 163.069, -84.5846, 150
Slice 30, pass = 0, slice in pass = 31, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -84.0846, 150
  point 2: -136.931, -84.0846, -150
  point 3: 163.069, -84.0846, 150
Slice 31, pass = 0, slice in pass = 32, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -83.5846, 150
  point 2: -136.931, -83.5846, -150
  point 3: 163.069, -83.5846, 150
Slice 32, pass = 0, slice in pass = 33, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -83.0846, 150
  point 2: -136.931, -83.0846, -150
  point 3: 163.069, -83.0846, 150
Slice 33, pass = 0, slice in pass = 34, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -82.5846, 150
  point 2: -136.931, -82.5846, -150
  point 3: 163.069, -82.5846, 150
Slice 34, pass = 0, slice in pass = 35, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -82.0846, 150
  point 2: -136.931, -82.0846, -150
  point 3: 163.069, -82.0846, 150
Slice 35, pass = 0, slice in pass = 36, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -81.5846, 150
  point 2: -136.931, -81.5846, -150
  point 3: 163.069, -81.5846, 150
Slice 36, pass = 0, slice in pass = 37, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -81.0846, 150
  point 2: -136.931, -81.0846, -150
  point 3: 163.069, -81.0846, 150
Slice 37, pass = 0, slice in pass = 38, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -80.5846, 150
  point 2: -136.931, -80.5846, -150
  point 3: 163.069, -80.5846, 150
Slice 38, pass = 0, slice in pass = 39, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -80.0846, 150
  point 2: -136.931, -80.0846, -150
  point 3: 163.069, -80.0846, 150
Slice 39, pass = 0, slice in pass = 40, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -79.5846, 150
  point 2: -136.931, -79.5846, -150
  point 3: 163.069, -79.5846, 150
Slice 40, pass = 0, slice in pass = 41, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -79.0846, 150
  point 2: -136.931, -79.0846, -150
  point 3: 163.069, -79.0846, 150
Slice 41, pass = 0, slice in pass = 42, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -78.5846, 150
  point 2: -136.931, -78.5846, -150
  point 3: 163.069, -78.5846, 150
Slice 42, pass = 0, slice in pass = 43, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -78.0846, 150
  point 2: -136.931, -78.0846, -150
  point 3: 163.069, -78.0846, 150
Slice 43, pass = 0, slice in pass = 44, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -77.5846, 150
  point 2: -136.931, -77.5846, -150
  point 3: 163.069, -77.5846, 150
Slice 44, pass = 0, slice in pass = 45, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -77.0846, 150
  point 2: -136.931, -77.0846, -150
  point 3: 163.069, -77.0846, 150
Slice 45, pass = 0, slice in pass = 46, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -76.5846, 150
  point 2: -136.931, -76.5846, -150
  point 3: 163.069, -76.5846, 150
Slice 46, pass = 0, slice in pass = 47, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -76.0846, 150
  point 2: -136.931, -76.0846, -150
  point 3: 163.069, -76.0846, 150
Slice 47, pass = 0, slice in pass = 48, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -75.5846, 150
  point 2: -136.931, -75.5846, -150
  point 3: 163.069, -75.5846, 150
Slice 48, pass = 0, slice in pass = 49, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -75.0846, 150
  point 2: -136.931, -75.0846, -150
  point 3: 163.069, -75.0846, 150
Slice 49, pass = 0, slice in pass = 50, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -74.5846, 150
  point 2: -136.931, -74.5846, -150
  point 3: 163.069, -74.5846, 150
Slice 50, pass = 0, slice in pass = 51, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -74.0846, 150
  point 2: -136.931, -74.0846, -150
  point 3: 163.069, -74.0846, 150
Slice 51, pass = 0, slice in pass = 52, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -73.5846, 150
  point 2: -136.931, -73.5846, -150
  point 3: 163.069, -73.5846, 150
Slice 52, pass = 0, slice in pass = 53, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -73.0846, 150
  point 2: -136.931, -73.0846, -150
  point 3: 163.069, -73.0846, 150
Slice 53, pass = 0, slice in pass = 54, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -72.5846, 150
  point 2: -136.931, -72.5846, -150
  point 3: 163.069, -72.5846, 150
Slice 54, pass = 0, slice in pass = 55, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -72.0846, 150
  point 2: -136.931, -72.0846, -150
  point 3: 163.069, -72.0846, 150
Slice 55, pass = 0, slice in pass = 56, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -71.5846, 150
  point 2: -136.931, -71.5846, -150
  point 3: 163.069, -71.5846, 150
Slice 56, pass = 0, slice in pass = 57, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -71.0846, 150
  point 2: -136.931, -71.0846, -150
  point 3: 163.069, -71.0846, 150
Slice 57, pass = 0, slice in pass = 58, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -70.5846, 150
  point 2: -136.931, -70.5846, -150
  point 3: 163.069, -70.5846, 150
Slice 58, pass = 0, slice in pass = 59, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -70.0846, 150
  point 2: -136.931, -70.0846, -150
  point 3: 163.069, -70.0846, 150
Slice 59, pass = 0, slice in pass = 60, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -69.5846, 150
  point 2: -136.931, -69.5846, -150
  point 3: 163.069, -69.5846, 150
Slice 60, pass = 0, slice in pass = 61, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -69.0846, 150
  point 2: -136.931, -69.0846, -150
  point 3: 163.069, -69.0846, 150
Slice 61, pass = 0, slice in pass = 62, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -68.5846, 150
  point 2: -136.931, -68.5846, -150
  point 3: 163.069, -68.5846, 150
Slice 62, pass = 0, slice in pass = 63, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -68.0846, 150
  point 2: -136.931, -68.0846, -150
  point 3: 163.069, -68.0846, 150
Slice 63, pass = 0, slice in pass = 64, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -67.5846, 150
  point 2: -136.931, -67.5846, -150
  point 3: 163.069, -67.5846, 150
Slice 64, pass = 0, slice in pass = 65, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -67.0846, 150
  point 2: -136.931, -67.0846, -150
  point 3: 163.069, -67.0846, 150
Slice 65, pass = 0, slice in pass = 66, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -66.5846, 150
  point 2: -136.931, -66.5846, -150
  point 3: 163.069, -66.5846, 150
Slice 66, pass = 0, slice in pass = 67, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -66.0846, 150
  point 2: -136.931, -66.0846, -150
  point 3: 163.069, -66.0846, 150
Slice 67, pass = 0, slice in pass = 68, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -65.5846, 150
  point 2: -136.931, -65.5846, -150
  point 3: 163.069, -65.5846, 150
Slice 68, pass = 0, slice in pass = 69, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -65.0846, 150
  point 2: -136.931, -65.0846, -150
  point 3: 163.069, -65.0846, 150
Slice 69, pass = 0, slice in pass = 70, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -64.5846, 150
  point 2: -136.931, -64.5846, -150
  point 3: 163.069, -64.5846, 150
Slice 70, pass = 0, slice in pass = 71, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -64.0846, 150
  point 2: -136.931, -64.0846, -150
  point 3: 163.069, -64.0846, 150
Slice 71, pass = 0, slice in pass = 72, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -63.5846, 150
  point 2: -136.931, -63.5846, -150
  point 3: 163.069, -63.5846, 150
Slice 72, pass = 0, slice in pass = 73, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -63.0846, 150
  point 2: -136.931, -63.0846, -150
  point 3: 163.069, -63.0846, 150
Slice 73, pass = 0, slice in pass = 74, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -62.5846, 150
  point 2: -136.931, -62.5846, -150
  point 3: 163.069, -62.5846, 150
Slice 74, pass = 0, slice in pass = 75, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -62.0846, 150
  point 2: -136.931, -62.0846, -150
  point 3: 163.069, -62.0846, 150
Slice 75, pass = 0, slice in pass = 76, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -61.5846, 150
  point 2: -136.931, -61.5846, -150
  point 3: 163.069, -61.5846, 150
Slice 76, pass = 0, slice in pass = 77, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -61.0846, 150
  point 2: -136.931, -61.0846, -150
  point 3: 163.069, -61.0846, 150
Slice 77, pass = 0, slice in pass = 78, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -60.5846, 150
  point 2: -136.931, -60.5846, -150
  point 3: 163.069, -60.5846, 150
Slice 78, pass = 0, slice in pass = 79, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -60.0846, 150
  point 2: -136.931, -60.0846, -150
  point 3: 163.069, -60.0846, 150
Slice 79, pass = 0, slice in pass = 80, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -59.5846, 150
  point 2: -136.931, -59.5846, -150
  point 3: 163.069, -59.5846, 150
Slice 80, pass = 0, slice in pass = 81, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -59.0846, 150
  point 2: -136.931, -59.0846, -150
  point 3: 163.069, -59.0846, 150
Slice 81, pass = 0, slice in pass = 82, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -58.5846, 150
  point 2: -136.931, -58.5846, -150
  point 3: 163.069, -58.5846, 150
Slice 82, pass = 0, slice in pass = 83, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -58.0846, 150
  point 2: -136.931, -58.0846, -150
  point 3: 163.069, -58.0846, 150
Slice 83, pass = 0, slice in pass = 84, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -57.5846, 150
  point 2: -136.931, -57.5846, -150
  point 3: 163.069, -57.5846, 150
Slice 84, pass = 0, slice in pass = 85, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -57.0846, 150
  point 2: -136.931, -57.0846, -150
  point 3: 163.069, -57.0846, 150
Slice 85, pass = 0, slice in pass = 86, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -56.5846, 150
  point 2: -136.931, -56.5846, -150
  point 3: 163.069, -56.5846, 150
Slice 86, pass = 0, slice in pass = 87, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -56.0846, 150
  point 2: -136.931, -56.0846, -150
  point 3: 163.069, -56.0846, 150
Slice 87, pass = 0, slice in pass = 88, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -55.5846, 150
  point 2: -136.931, -55.5846, -150
  point 3: 163.069, -55.5846, 150
Slice 88, pass = 0, slice in pass = 89, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -55.0846, 150
  point 2: -136.931, -55.0846, -150
  point 3: 163.069, -55.0846, 150
Slice 89, pass = 0, slice in pass = 90, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -54.5846, 150
  point 2: -136.931, -54.5846, -150
  point 3: 163.069, -54.5846, 150
Slice 90, pass = 0, slice in pass = 91, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -54.0846, 150
  point 2: -136.931, -54.0846, -150
  point 3: 163.069, -54.0846, 150
Slice 91, pass = 0, slice in pass = 92, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -53.5846, 150
  point 2: -136.931, -53.5846, -150
  point 3: 163.069, -53.5846, 150
Slice 92, pass = 0, slice in pass = 93, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -53.0846, 150
  point 2: -136.931, -53.0846, -150
  point 3: 163.069, -53.0846, 150
Slice 93, pass = 0, slice in pass = 94, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -52.5846, 150
  point 2: -136.931, -52.5846, -150
  point 3: 163.069, -52.5846, 150
Slice 94, pass = 0, slice in pass = 95, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -52.0846, 150
  point 2: -136.931, -52.0846, -150
  point 3: 163.069, -52.0846, 150
Slice 95, pass = 0, slice in pass = 96, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -51.5846, 150
  point 2: -136.931, -51.5846, -150
  point 3: 163.069, -51.5846, 150
Slice 96, pass = 0, slice in pass = 97, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -51.0846, 150
  point 2: -136.931, -51.0846, -150
  point 3: 163.069, -51.0846, 150
Slice 97, pass = 0, slice in pass = 98, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -50.5846, 150
  point 2: -136.931, -50.5846, -150
  point 3: 163.069, -50.5846, 150
Slice 98, pass = 0, slice in pass = 99, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -50.0846, 150
  point 2: -136.931, -50.0846, -150
  point 3: 163.069, -50.0846, 150
Slice 99, pass = 0, slice in pass = 100, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -49.5846, 150
  point 2: -136.931, -49.5846, -150
  point 3: 163.069, -49.5846, 150
Slice 100, pass = 0, slice in pass = 101, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -49.0846, 150
  point 2: -136.931, -49.0846, -150
  point 3: 163.069, -49.0846, 150
Slice 101, pass = 0, slice in pass = 102, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -48.5846, 150
  point 2: -136.931, -48.5846, -150
  point 3: 163.069, -48.5846, 150
Slice 102, pass = 0, slice in pass = 103, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -48.0846, 150
  point 2: -136.931, -48.0846, -150
  point 3: 163.069, -48.0846, 150
Slice 103, pass = 0, slice in pass = 104, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -47.5846, 150
  point 2: -136.931, -47.5846, -150
  point 3: 163.069, -47.5846, 150
Slice 104, pass = 0, slice in pass = 105, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -47.0846, 150
  point 2: -136.931, -47.0846, -150
  point 3: 163.069, -47.0846, 150
Slice 105, pass = 0, slice in pass = 106, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -46.5846, 150
  point 2: -136.931, -46.5846, -150
  point 3: 163.069, -46.5846, 150
Slice 106, pass = 0, slice in pass = 107, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -46.0846, 150
  point 2: -136.931, -46.0846, -150
  point 3: 163.069, -46.0846, 150
Slice 107, pass = 0, slice in pass = 108, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -45.5846, 150
  point 2: -136.931, -45.5846, -150
  point 3: 163.069, -45.5846, 150
Slice 108, pass = 0, slice in pass = 109, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -45.0846, 150
  point 2: -136.931, -45.0846, -150
  point 3: 163.069, -45.0846, 150
Slice 109, pass = 0, slice in pass = 110, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -44.5846, 150
  point 2: -136.931, -44.5846, -150
  point 3: 163.069, -44.5846, 150
Slice 110, pass = 0, slice in pass = 111, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -44.0846, 150
  point 2: -136.931, -44.0846, -150
  point 3: 163.069, -44.0846, 150
Slice 111, pass = 0, slice in pass = 112, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -43.5846, 150
  point 2: -136.931, -43.5846, -150
  point 3: 163.069, -43.5846, 150
Slice 112, pass = 0, slice in pass = 113, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -43.0846, 150
  point 2: -136.931, -43.0846, -150
  point 3: 163.069, -43.0846, 150
Slice 113, pass = 0, slice in pass = 114, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -42.5846, 150
  point 2: -136.931, -42.5846, -150
  point 3: 163.069, -42.5846, 150
Slice 114, pass = 0, slice in pass = 115, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -42.0846, 150
  point 2: -136.931, -42.0846, -150
  point 3: 163.069, -42.0846, 150
Slice 115, pass = 0, slice in pass = 116, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -41.5846, 150
  point 2: -136.931, -41.5846, -150
  point 3: 163.069, -41.5846, 150
Slice 116, pass = 0, slice in pass = 117, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -41.0846, 150
  point 2: -136.931, -41.0846, -150
  point 3: 163.069, -41.0846, 150
Slice 117, pass = 0, slice in pass = 118, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -40.5846, 150
  point 2: -136.931, -40.5846, -150
  point 3: 163.069, -40.5846, 150
Slice 118, pass = 0, slice in pass = 119, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -40.0846, 150
  point 2: -136.931, -40.0846, -150
  point 3: 163.069, -40.0846, 150
Slice 119, pass = 0, slice in pass = 120, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -39.5846, 150
  point 2: -136.931, -39.5846, -150
  point 3: 163.069, -39.5846, 150
Slice 120, pass = 0, slice in pass = 121, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -39.0846, 150
  point 2: -136.931, -39.0846, -150
  point 3: 163.069, -39.0846, 150
Slice 121, pass = 0, slice in pass = 122, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -38.5846, 150
  point 2: -136.931, -38.5846, -150
  point 3: 163.069, -38.5846, 150
Slice 122, pass = 0, slice in pass = 123, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -38.0846, 150
  point 2: -136.931, -38.0846, -150
  point 3: 163.069, -38.0846, 150
Slice 123, pass = 0, slice in pass = 124, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -37.5846, 150
  point 2: -136.931, -37.5846, -150
  point 3: 163.069, -37.5846, 150
Slice 124, pass = 0, slice in pass = 125, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -37.0846, 150
  point 2: -136.931, -37.0846, -150
  point 3: 163.069, -37.0846, 150
Slice 125, pass = 0, slice in pass = 126, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -36.5846, 150
  point 2: -136.931, -36.5846, -150
  point 3: 163.069, -36.5846, 150
Slice 126, pass = 0, slice in pass = 127, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -36.0846, 150
  point 2: -136.931, -36.0846, -150
  point 3: 163.069, -36.0846, 150
Slice 127, pass = 0, slice in pass = 128, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -35.5846, 150
  point 2: -136.931, -35.5846, -150
  point 3: 163.069, -35.5846, 150
Slice 128, pass = 0, slice in pass = 129, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -35.0846, 150
  point 2: -136.931, -35.0846, -150
  point 3: 163.069, -35.0846, 150
Slice 129, pass = 0, slice in pass = 130, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -34.5846, 150
  point 2: -136.931, -34.5846, -150
  point 3: 163.069, -34.5846, 150
Slice 130, pass = 0, slice in pass = 131, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -34.0846, 150
  point 2: -136.931, -34.0846, -150
  point 3: 163.069, -34.0846, 150
Slice 131, pass = 0, slice in pass = 132, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -33.5846, 150
  point 2: -136.931, -33.5846, -150
  point 3: 163.069, -33.5846, 150
Slice 132, pass = 0, slice in pass = 133, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -33.0846, 150
  point 2: -136.931, -33.0846, -150
  point 3: 163.069, -33.0846, 150
Slice 133, pass = 0, slice in pass = 134, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -32.5846, 150
  point 2: -136.931, -32.5846, -150
  point 3: 163.069, -32.5846, 150
Slice 134, pass = 0, slice in pass = 135, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -32.0846, 150
  point 2: -136.931, -32.0846, -150
  point 3: 163.069, -32.0846, 150
Slice 135, pass = 0, slice in pass = 136, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -31.5846, 150
  point 2: -136.931, -31.5846, -150
  point 3: 163.069, -31.5846, 150
Slice 136, pass = 0, slice in pass = 137, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -31.0846, 150
  point 2: -136.931, -31.0846, -150
  point 3: 163.069, -31.0846, 150
Slice 137, pass = 0, slice in pass = 138, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -30.5846, 150
  point 2: -136.931, -30.5846, -150
  point 3: 163.069, -30.5846, 150
Slice 138, pass = 0, slice in pass = 139, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -30.0846, 150
  point 2: -136.931, -30.0846, -150
  point 3: 163.069, -30.0846, 150
Slice 139, pass = 0, slice in pass = 140, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -29.5846, 150
  point 2: -136.931, -29.5846, -150
  point 3: 163.069, -29.5846, 150
Slice 140, pass = 0, slice in pass = 141, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -29.0846, 150
  point 2: -136.931, -29.0846, -150
  point 3: 163.069, -29.0846, 150
Slice 141, pass = 0, slice in pass = 142, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -28.5846, 150
  point 2: -136.931, -28.5846, -150
  point 3: 163.069, -28.5846, 150
Slice 142, pass = 0, slice in pass = 143, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -28.0846, 150
  point 2: -136.931, -28.0846, -150
  point 3: 163.069, -28.0846, 150
Slice 143, pass = 0, slice in pass = 144, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -27.5846, 150
  point 2: -136.931, -27.5846, -150
  point 3: 163.069, -27.5846, 150
Slice 144, pass = 0, slice in pass = 145, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -27.0846, 150
  point 2: -136.931, -27.0846, -150
  point 3: 163.069, -27.0846, 150
Slice 145, pass = 0, slice in pass = 146, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -26.5846, 150
  point 2: -136.931, -26.5846, -150
  point 3: 163.069, -26.5846, 150
Slice 146, pass = 0, slice in pass = 147, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -26.0846, 150
  point 2: -136.931, -26.0846, -150
  point 3: 163.069, -26.0846, 150
Slice 147, pass = 0, slice in pass = 148, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -25.5846, 150
  point 2: -136.931, -25.5846, -150
  point 3: 163.069, -25.5846, 150
Slice 148, pass = 0, slice in pass = 149, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -25.0846, 150
  point 2: -136.931, -25.0846, -150
  point 3: 163.069, -25.0846, 150
Slice 149, pass = 0, slice in pass = 150, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -24.5846, 150
  point 2: -136.931, -24.5846, -150
  point 3: 163.069, -24.5846, 150
Slice 150, pass = 0, slice in pass = 151, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -24.0846, 150
  point 2: -136.931, -24.0846, -150
  point 3: 163.069, -24.0846, 150
Slice 151, pass = 0, slice in pass = 152, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -23.5846, 150
  point 2: -136.931, -23.5846, -150
  point 3: 163.069, -23.5846, 150
Slice 152, pass = 0, slice in pass = 153, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -23.0846, 150
  point 2: -136.931, -23.0846, -150
  point 3: 163.069, -23.0846, 150
Slice 153, pass = 0, slice in pass = 154, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -22.5846, 150
  point 2: -136.931, -22.5846, -150
  point 3: 163.069, -22.5846, 150
Slice 154, pass = 0, slice in pass = 155, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -22.0846, 150
  point 2: -136.931, -22.0846, -150
  point 3: 163.069, -22.0846, 150
Slice 155, pass = 0, slice in pass = 156, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -21.5846, 150
  point 2: -136.931, -21.5846, -150
  point 3: 163.069, -21.5846, 150
Slice 156, pass = 0, slice in pass = 157, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -21.0846, 150
  point 2: -136.931, -21.0846, -150
  point 3: 163.069, -21.0846, 150
Slice 157, pass = 0, slice in pass = 158, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -20.5846, 150
  point 2: -136.931, -20.5846, -150
  point 3: 163.069, -20.5846, 150
Slice 158, pass = 0, slice in pass = 159, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -20.0846, 150
  point 2: -136.931, -20.0846, -150
  point 3: 163.069, -20.0846, 150
Slice 159, pass = 0, slice in pass = 160, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -19.5846, 150
  point 2: -136.931, -19.5846, -150
  point 3: 163.069, -19.5846, 150
Slice 160, pass = 0, slice in pass = 161, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -19.0846, 150
  point 2: -136.931, -19.0846, -150
  point 3: 163.069, -19.0846, 150
Slice 161, pass = 0, slice in pass = 162, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -18.5846, 150
  point 2: -136.931, -18.5846, -150
  point 3: 163.069, -18.5846, 150
Slice 162, pass = 0, slice in pass = 163, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -18.0846, 150
  point 2: -136.931, -18.0846, -150
  point 3: 163.069, -18.0846, 150
Slice 163, pass = 0, slice in pass = 164, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -17.5846, 150
  point 2: -136.931, -17.5846, -150
  point 3: 163.069, -17.5846, 150
Slice 164, pass = 0, slice in pass = 165, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -17.0846, 150
  point 2: -136.931, -17.0846, -150
  point 3: 163.069, -17.0846, 150
Slice 165, pass = 0, slice in pass = 166, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -16.5846, 150
  point 2: -136.931, -16.5846, -150
  point 3: 163.069, -16.5846, 150
Slice 166, pass = 0, slice in pass = 167, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -16.0846, 150
  point 2: -136.931, -16.0846, -150
  point 3: 163.069, -16.0846, 150
Slice 167, pass = 0, slice in pass = 168, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -15.5846, 150
  point 2: -136.931, -15.5846, -150
  point 3: 163.069, -15.5846, 150
Slice 168, pass = 0, slice in pass = 169, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -15.0846, 150
  point 2: -136.931, -15.0846, -150
  point 3: 163.069, -15.0846, 150
Slice 169, pass = 0, slice in pass = 170, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -14.5846, 150
  point 2: -136.931, -14.5846, -150
  point 3: 163.069, -14.5846, 150
Slice 170, pass = 0, slice in pass = 171, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -14.0846, 150
  point 2: -136.931, -14.0846, -150
  point 3: 163.069, -14.0846, 150
Slice 171, pass = 0, slice in pass = 172, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -13.5846, 150
  point 2: -136.931, -13.5846, -150
  point 3: 163.069, -13.5846, 150
Slice 172, pass = 0, slice in pass = 173, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -13.0846, 150
  point 2: -136.931, -13.0846, -150
  point 3: 163.069, -13.0846, 150
Slice 173, pass = 0, slice in pass = 174, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -12.5846, 150
  point 2: -136.931, -12.5846, -150
  point 3: 163.069, -12.5846, 150
Slice 174, pass = 0, slice in pass = 175, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -12.0846, 150
  point 2: -136.931, -12.0846, -150
  point 3: 163.069, -12.0846, 150
Slice 175, pass = 0, slice in pass = 176, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -11.5846, 150
  point 2: -136.931, -11.5846, -150
  point 3: 163.069, -11.5846, 150
Slice 176, pass = 0, slice in pass = 177, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -11.0846, 150
  point 2: -136.931, -11.0846, -150
  point 3: 163.069, -11.0846, 150
Slice 177, pass = 0, slice in pass = 178, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -10.5846, 150
  point 2: -136.931, -10.5846, -150
  point 3: 163.069, -10.5846, 150
Slice 178, pass = 0, slice in pass = 179, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -10.0846, 150
  point 2: -136.931, -10.0846, -150
  point 3: 163.069, -10.0846, 150
Slice 179, pass = 0, slice in pass = 180, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -9.58459, 150
  point 2: -136.931, -9.58459, -150
  point 3: 163.069, -9.58459, 150
Slice 180, pass = 0, slice in pass = 181, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -9.08459, 150
  point 2: -136.931, -9.08459, -150
  point 3: 163.069, -9.08459, 150
Slice 181, pass = 0, slice in pass = 182, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -8.58459, 150
  point 2: -136.931, -8.58459, -150
  point 3: 163.069, -8.58459, 150
Slice 182, pass = 0, slice in pass = 183, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -8.08459, 150
  point 2: -136.931, -8.08459, -150
  point 3: 163.069, -8.08459, 150
Slice 183, pass = 0, slice in pass = 184, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -7.58459, 150
  point 2: -136.931, -7.58459, -150
  point 3: 163.069, -7.58459, 150
Slice 184, pass = 0, slice in pass = 185, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -7.08459, 150
  point 2: -136.931, -7.08459, -150
  point 3: 163.069, -7.08459, 150
Slice 185, pass = 0, slice in pass = 186, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -6.58459, 150
  point 2: -136.931, -6.58459, -150
  point 3: 163.069, -6.58459, 150
Slice 186, pass = 0, slice in pass = 187, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -6.08459, 150
  point 2: -136.931, -6.08459, -150
  point 3: 163.069, -6.08459, 150
Slice 187, pass = 0, slice in pass = 188, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -5.58459, 150
  point 2: -136.931, -5.58459, -150
  point 3: 163.069, -5.58459, 150
Slice 188, pass = 0, slice in pass = 189, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -5.08459, 150
  point 2: -136.931, -5.08459, -150
  point 3: 163.069, -5.08459, 150
Slice 189, pass = 0, slice in pass = 190, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -4.58459, 150
  point 2: -136.931, -4.58459, -150
  point 3: 163.069, -4.58459, 150
Slice 190, pass = 0, slice in pass = 191, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -4.08459, 150
  point 2: -136.931, -4.08459, -150
  point 3: 163.069, -4.08459, 150
Slice 191, pass = 0, slice in pass = 192, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -3.58459, 150
  point 2: -136.931, -3.58459, -150
  point 3: 163.069, -3.58459, 150
Slice 192, pass = 0, slice in pass = 193, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -3.08459, 150
  point 2: -136.931, -3.08459, -150
  point 3: 163.069, -3.08459, 150
Slice 193, pass = 0, slice in pass = 194, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -2.58459, 150
  point 2: -136.931, -2.58459, -150
  point 3: 163.069, -2.58459, 150
Slice 194, pass = 0, slice in pass = 195, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -2.08459, 150
  point 2: -136.931, -2.08459, -150
  point 3: 163.069, -2.08459, 150
Slice 195, pass = 0, slice in pass = 196, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -1.58459, 150
  point 2: -136.931, -1.58459, -150
  point 3: 163.069, -1.58459, 150
Slice 196, pass = 0, slice in pass = 197, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -1.08459, 150
  point 2: -136.931, -1.08459, -150
  point 3: 163.069, -1.08459, 150
Slice 197, pass = 0, slice in pass = 198, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -0.584595, 150
  point 2: -136.931, -0.584595, -150
  point 3: 163.069, -0.584595, 150
Slice 198, pass = 0, slice in pass = 199, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, -0.0845947, 150
  point 2: -136.931, -0.0845947, -150
  point 3: 163.069, -0.0845947, 150
Slice 199, pass = 0, slice in pass = 200, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 0.415405, 150
  point 2: -136.931, 0.415405, -150
  point 3: 163.069, 0.415405, 150
Slice 200, pass = 0, slice in pass = 201, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 0.915405, 150
  point 2: -136.931, 0.915405, -150
  point 3: 163.069, 0.915405, 150
Slice 201, pass = 0, slice in pass = 202, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 1.41541, 150
  point 2: -136.931, 1.41541, -150
  point 3: 163.069, 1.41541, 150
Slice 202, pass = 0, slice in pass = 203, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 1.91541, 150
  point 2: -136.931, 1.91541, -150
  point 3: 163.069, 1.91541, 150
Slice 203, pass = 0, slice in pass = 204, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 2.41541, 150
  point 2: -136.931, 2.41541, -150
  point 3: 163.069, 2.41541, 150
Slice 204, pass = 0, slice in pass = 205, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 2.91541, 150
  point 2: -136.931, 2.91541, -150
  point 3: 163.069, 2.91541, 150
Slice 205, pass = 0, slice in pass = 206, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 3.41541, 150
  point 2: -136.931, 3.41541, -150
  point 3: 163.069, 3.41541, 150
Slice 206, pass = 0, slice in pass = 207, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 3.91541, 150
  point 2: -136.931, 3.91541, -150
  point 3: 163.069, 3.91541, 150
Slice 207, pass = 0, slice in pass = 208, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 4.41541, 150
  point 2: -136.931, 4.41541, -150
  point 3: 163.069, 4.41541, 150
Slice 208, pass = 0, slice in pass = 209, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 4.91541, 150
  point 2: -136.931, 4.91541, -150
  point 3: 163.069, 4.91541, 150
Slice 209, pass = 0, slice in pass = 210, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 5.41541, 150
  point 2: -136.931, 5.41541, -150
  point 3: 163.069, 5.41541, 150
Slice 210, pass = 0, slice in pass = 211, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 5.91541, 150
  point 2: -136.931, 5.91541, -150
  point 3: 163.069, 5.91541, 150
Slice 211, pass = 0, slice in pass = 212, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 6.41541, 150
  point 2: -136.931, 6.41541, -150
  point 3: 163.069, 6.41541, 150
Slice 212, pass = 0, slice in pass = 213, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 6.91541, 150
  point 2: -136.931, 6.91541, -150
  point 3: 163.069, 6.91541, 150
Slice 213, pass = 0, slice in pass = 214, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 7.41541, 150
  point 2: -136.931, 7.41541, -150
  point 3: 163.069, 7.41541, 150
Slice 214, pass = 0, slice in pass = 215, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 7.91541, 150
  point 2: -136.931, 7.91541, -150
  point 3: 163.069, 7.91541, 150
Slice 215, pass = 0, slice in pass = 216, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 8.41541, 150
  point 2: -136.931, 8.41541, -150
  point 3: 163.069, 8.41541, 150
Slice 216, pass = 0, slice in pass = 217, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 8.91541, 150
  point 2: -136.931, 8.91541, -150
  point 3: 163.069, 8.91541, 150
Slice 217, pass = 0, slice in pass = 218, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 9.41541, 150
  point 2: -136.931, 9.41541, -150
  point 3: 163.069, 9.41541, 150
Slice 218, pass = 0, slice in pass = 219, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 9.91541, 150
  point 2: -136.931, 9.91541, -150
  point 3: 163.069, 9.91541, 150
Slice 219, pass = 0, slice in pass = 220, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 10.4154, 150
  point 2: -136.931, 10.4154, -150
  point 3: 163.069, 10.4154, 150
Slice 220, pass = 0, slice in pass = 221, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 10.9154, 150
  point 2: -136.931, 10.9154, -150
  point 3: 163.069, 10.9154, 150
Slice 221, pass = 0, slice in pass = 222, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 11.4154, 150
  point 2: -136.931, 11.4154, -150
  point 3: 163.069, 11.4154, 150
Slice 222, pass = 0, slice in pass = 223, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 11.9154, 150
  point 2: -136.931, 11.9154, -150
  point 3: 163.069, 11.9154, 150
Slice 223, pass = 0, slice in pass = 224, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 12.4154, 150
  point 2: -136.931, 12.4154, -150
  point 3: 163.069, 12.4154, 150
Slice 224, pass = 0, slice in pass = 225, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 12.9154, 150
  point 2: -136.931, 12.9154, -150
  point 3: 163.069, 12.9154, 150
Slice 225, pass = 0, slice in pass = 226, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 13.4154, 150
  point 2: -136.931, 13.4154, -150
  point 3: 163.069, 13.4154, 150
Slice 226, pass = 0, slice in pass = 227, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 13.9154, 150
  point 2: -136.931, 13.9154, -150
  point 3: 163.069, 13.9154, 150
Slice 227, pass = 0, slice in pass = 228, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 14.4154, 150
  point 2: -136.931, 14.4154, -150
  point 3: 163.069, 14.4154, 150
Slice 228, pass = 0, slice in pass = 229, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 14.9154, 150
  point 2: -136.931, 14.9154, -150
  point 3: 163.069, 14.9154, 150
Slice 229, pass = 0, slice in pass = 230, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 15.4154, 150
  point 2: -136.931, 15.4154, -150
  point 3: 163.069, 15.4154, 150
Slice 230, pass = 0, slice in pass = 231, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 15.9154, 150
  point 2: -136.931, 15.9154, -150
  point 3: 163.069, 15.9154, 150
Slice 231, pass = 0, slice in pass = 232, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 16.4154, 150
  point 2: -136.931, 16.4154, -150
  point 3: 163.069, 16.4154, 150
Slice 232, pass = 0, slice in pass = 233, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 16.9154, 150
  point 2: -136.931, 16.9154, -150
  point 3: 163.069, 16.9154, 150
Slice 233, pass = 0, slice in pass = 234, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 17.4154, 150
  point 2: -136.931, 17.4154, -150
  point 3: 163.069, 17.4154, 150
Slice 234, pass = 0, slice in pass = 235, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 17.9154, 150
  point 2: -136.931, 17.9154, -150
  point 3: 163.069, 17.9154, 150
Slice 235, pass = 0, slice in pass = 236, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 18.4154, 150
  point 2: -136.931, 18.4154, -150
  point 3: 163.069, 18.4154, 150
Slice 236, pass = 0, slice in pass = 237, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 18.9154, 150
  point 2: -136.931, 18.9154, -150
  point 3: 163.069, 18.9154, 150
Slice 237, pass = 0, slice in pass = 238, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 19.4154, 150
  point 2: -136.931, 19.4154, -150
  point 3: 163.069, 19.4154, 150
Slice 238, pass = 0, slice in pass = 239, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 19.9154, 150
  point 2: -136.931, 19.9154, -150
  point 3: 163.069, 19.9154, 150
Slice 239, pass = 0, slice in pass = 240, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 20.4154, 150
  point 2: -136.931, 20.4154, -150
  point 3: 163.069, 20.4154, 150
Slice 240, pass = 0, slice in pass = 241, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 20.9154, 150
  point 2: -136.931, 20.9154, -150
  point 3: 163.069, 20.9154, 150
Slice 241, pass = 0, slice in pass = 242, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 21.4154, 150
  point 2: -136.931, 21.4154, -150
  point 3: 163.069, 21.4154, 150
Slice 242, pass = 0, slice in pass = 243, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 21.9154, 150
  point 2: -136.931, 21.9154, -150
  point 3: 163.069, 21.9154, 150
Slice 243, pass = 0, slice in pass = 244, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 22.4154, 150
  point 2: -136.931, 22.4154, -150
  point 3: 163.069, 22.4154, 150
Slice 244, pass = 0, slice in pass = 245, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 22.9154, 150
  point 2: -136.931, 22.9154, -150
  point 3: 163.069, 22.9154, 150
Slice 245, pass = 0, slice in pass = 246, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 23.4154, 150
  point 2: -136.931, 23.4154, -150
  point 3: 163.069, 23.4154, 150
Slice 246, pass = 0, slice in pass = 247, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 23.9154, 150
  point 2: -136.931, 23.9154, -150
  point 3: 163.069, 23.9154, 150
Slice 247, pass = 0, slice in pass = 248, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 24.4154, 150
  point 2: -136.931, 24.4154, -150
  point 3: 163.069, 24.4154, 150
Slice 248, pass = 0, slice in pass = 249, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 24.9154, 150
  point 2: -136.931, 24.9154, -150
  point 3: 163.069, 24.9154, 150
Slice 249, pass = 0, slice in pass = 250, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 25.4154, 150
  point 2: -136.931, 25.4154, -150
  point 3: 163.069, 25.4154, 150
Slice 250, pass = 0, slice in pass = 251, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 25.9154, 150
  point 2: -136.931, 25.9154, -150
  point 3: 163.069, 25.9154, 150
Slice 251, pass = 0, slice in pass = 252, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 26.4154, 150
  point 2: -136.931, 26.4154, -150
  point 3: 163.069, 26.4154, 150
Slice 252, pass = 0, slice in pass = 253, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 26.9154, 150
  point 2: -136.931, 26.9154, -150
  point 3: 163.069, 26.9154, 150
Slice 253, pass = 0, slice in pass = 254, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 27.4154, 150
  point 2: -136.931, 27.4154, -150
  point 3: 163.069, 27.4154, 150
Slice 254, pass = 0, slice in pass = 255, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 27.9154, 150
  point 2: -136.931, 27.9154, -150
  point 3: 163.069, 27.9154, 150
Slice 255, pass = 0, slice in pass = 256, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 28.4154, 150
  point 2: -136.931, 28.4154, -150
  point 3: 163.069, 28.4154, 150
Slice 256, pass = 0, slice in pass = 257, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 28.9154, 150
  point 2: -136.931, 28.9154, -150
  point 3: 163.069, 28.9154, 150
Slice 257, pass = 0, slice in pass = 258, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 29.4154, 150
  point 2: -136.931, 29.4154, -150
  point 3: 163.069, 29.4154, 150
Slice 258, pass = 0, slice in pass = 259, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 29.9154, 150
  point 2: -136.931, 29.9154, -150
  point 3: 163.069, 29.9154, 150
Slice 259, pass = 0, slice in pass = 260, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 30.4154, 150
  point 2: -136.931, 30.4154, -150
  point 3: 163.069, 30.4154, 150
Slice 260, pass = 0, slice in pass = 261, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 30.9154, 150
  point 2: -136.931, 30.9154, -150
  point 3: 163.069, 30.9154, 150
Slice 261, pass = 0, slice in pass = 262, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 31.4154, 150
  point 2: -136.931, 31.4154, -150
  point 3: 163.069, 31.4154, 150
Slice 262, pass = 0, slice in pass = 263, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 31.9154, 150
  point 2: -136.931, 31.9154, -150
  point 3: 163.069, 31.9154, 150
Slice 263, pass = 0, slice in pass = 264, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 32.4154, 150
  point 2: -136.931, 32.4154, -150
  point 3: 163.069, 32.4154, 150
Slice 264, pass = 0, slice in pass = 265, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 32.9154, 150
  point 2: -136.931, 32.9154, -150
  point 3: 163.069, 32.9154, 150
Slice 265, pass = 0, slice in pass = 266, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 33.4154, 150
  point 2: -136.931, 33.4154, -150
  point 3: 163.069, 33.4154, 150
Slice 266, pass = 0, slice in pass = 267, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 33.9154, 150
  point 2: -136.931, 33.9154, -150
  point 3: 163.069, 33.9154, 150
Slice 267, pass = 0, slice in pass = 268, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 34.4154, 150
  point 2: -136.931, 34.4154, -150
  point 3: 163.069, 34.4154, 150
Slice 268, pass = 0, slice in pass = 269, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 34.9154, 150
  point 2: -136.931, 34.9154, -150
  point 3: 163.069, 34.9154, 150
Slice 269, pass = 0, slice in pass = 270, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 35.4154, 150
  point 2: -136.931, 35.4154, -150
  point 3: 163.069, 35.4154, 150
Slice 270, pass = 0, slice in pass = 271, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 35.9154, 150
  point 2: -136.931, 35.9154, -150
  point 3: 163.069, 35.9154, 150
Slice 271, pass = 0, slice in pass = 272, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 36.4154, 150
  point 2: -136.931, 36.4154, -150
  point 3: 163.069, 36.4154, 150
Slice 272, pass = 0, slice in pass = 273, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 36.9154, 150
  point 2: -136.931, 36.9154, -150
  point 3: 163.069, 36.9154, 150
Slice 273, pass = 0, slice in pass = 274, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 37.4154, 150
  point 2: -136.931, 37.4154, -150
  point 3: 163.069, 37.4154, 150
Slice 274, pass = 0, slice in pass = 275, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 37.9154, 150
  point 2: -136.931, 37.9154, -150
  point 3: 163.069, 37.9154, 150
Slice 275, pass = 0, slice in pass = 276, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 38.4154, 150
  point 2: -136.931, 38.4154, -150
  point 3: 163.069, 38.4154, 150
Slice 276, pass = 0, slice in pass = 277, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 38.9154, 150
  point 2: -136.931, 38.9154, -150
  point 3: 163.069, 38.9154, 150
Slice 277, pass = 0, slice in pass = 278, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 39.4154, 150
  point 2: -136.931, 39.4154, -150
  point 3: 163.069, 39.4154, 150
Slice 278, pass = 0, slice in pass = 279, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 39.9154, 150
  point 2: -136.931, 39.9154, -150
  point 3: 163.069, 39.9154, 150
Slice 279, pass = 0, slice in pass = 280, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 40.4154, 150
  point 2: -136.931, 40.4154, -150
  point 3: 163.069, 40.4154, 150
Slice 280, pass = 0, slice in pass = 281, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 40.9154, 150
  point 2: -136.931, 40.9154, -150
  point 3: 163.069, 40.9154, 150
Slice 281, pass = 0, slice in pass = 282, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 41.4154, 150
  point 2: -136.931, 41.4154, -150
  point 3: 163.069, 41.4154, 150
Slice 282, pass = 0, slice in pass = 283, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 41.9154, 150
  point 2: -136.931, 41.9154, -150
  point 3: 163.069, 41.9154, 150
Slice 283, pass = 0, slice in pass = 284, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 42.4154, 150
  point 2: -136.931, 42.4154, -150
  point 3: 163.069, 42.4154, 150
Slice 284, pass = 0, slice in pass = 285, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 42.9154, 150
  point 2: -136.931, 42.9154, -150
  point 3: 163.069, 42.9154, 150
Slice 285, pass = 0, slice in pass = 286, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 43.4154, 150
  point 2: -136.931, 43.4154, -150
  point 3: 163.069, 43.4154, 150
Slice 286, pass = 0, slice in pass = 287, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 43.9154, 150
  point 2: -136.931, 43.9154, -150
  point 3: 163.069, 43.9154, 150
Slice 287, pass = 0, slice in pass = 288, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 44.4154, 150
  point 2: -136.931, 44.4154, -150
  point 3: 163.069, 44.4154, 150
Slice 288, pass = 0, slice in pass = 289, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 44.9154, 150
  point 2: -136.931, 44.9154, -150
  point 3: 163.069, 44.9154, 150
Slice 289, pass = 0, slice in pass = 290, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 45.4154, 150
  point 2: -136.931, 45.4154, -150
  point 3: 163.069, 45.4154, 150
Slice 290, pass = 0, slice in pass = 291, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 45.9154, 150
  point 2: -136.931, 45.9154, -150
  point 3: 163.069, 45.9154, 150
Slice 291, pass = 0, slice in pass = 292, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 46.4154, 150
  point 2: -136.931, 46.4154, -150
  point 3: 163.069, 46.4154, 150
Slice 292, pass = 0, slice in pass = 293, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 46.9154, 150
  point 2: -136.931, 46.9154, -150
  point 3: 163.069, 46.9154, 150
Slice 293, pass = 0, slice in pass = 294, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 47.4154, 150
  point 2: -136.931, 47.4154, -150
  point 3: 163.069, 47.4154, 150
Slice 294, pass = 0, slice in pass = 295, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 47.9154, 150
  point 2: -136.931, 47.9154, -150
  point 3: 163.069, 47.9154, 150
Slice 295, pass = 0, slice in pass = 296, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 48.4154, 150
  point 2: -136.931, 48.4154, -150
  point 3: 163.069, 48.4154, 150
Slice 296, pass = 0, slice in pass = 297, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 48.9154, 150
  point 2: -136.931, 48.9154, -150
  point 3: 163.069, 48.9154, 150
Slice 297, pass = 0, slice in pass = 298, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 49.4154, 150
  point 2: -136.931, 49.4154, -150
  point 3: 163.069, 49.4154, 150
Slice 298, pass = 0, slice in pass = 299, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 49.9154, 150
  point 2: -136.931, 49.9154, -150
  point 3: 163.069, 49.9154, 150
Slice 299, pass = 0, slice in pass = 300, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 50.4154, 150
  point 2: -136.931, 50.4154, -150
  point 3: 163.069, 50.4154, 150
Slice 300, pass = 0, slice in pass = 301, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 50.9154, 150
  point 2: -136.931, 50.9154, -150
  point 3: 163.069, 50.9154, 150
Slice 301, pass = 0, slice in pass = 302, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 51.4154, 150
  point 2: -136.931, 51.4154, -150
  point 3: 163.069, 51.4154, 150
Slice 302, pass = 0, slice in pass = 303, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 51.9154, 150
  point 2: -136.931, 51.9154, -150
  point 3: 163.069, 51.9154, 150
Slice 303, pass = 0, slice in pass = 304, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 52.4154, 150
  point 2: -136.931, 52.4154, -150
  point 3: 163.069, 52.4154, 150
Slice 304, pass = 0, slice in pass = 305, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 52.9154, 150
  point 2: -136.931, 52.9154, -150
  point 3: 163.069, 52.9154, 150
Slice 305, pass = 0, slice in pass = 306, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 53.4154, 150
  point 2: -136.931, 53.4154, -150
  point 3: 163.069, 53.4154, 150
Slice 306, pass = 0, slice in pass = 307, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 53.9154, 150
  point 2: -136.931, 53.9154, -150
  point 3: 163.069, 53.9154, 150
Slice 307, pass = 0, slice in pass = 308, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 54.4154, 150
  point 2: -136.931, 54.4154, -150
  point 3: 163.069, 54.4154, 150
Slice 308, pass = 0, slice in pass = 309, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 54.9154, 150
  point 2: -136.931, 54.9154, -150
  point 3: 163.069, 54.9154, 150
Slice 309, pass = 0, slice in pass = 310, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 55.4154, 150
  point 2: -136.931, 55.4154, -150
  point 3: 163.069, 55.4154, 150
Slice 310, pass = 0, slice in pass = 311, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 55.9154, 150
  point 2: -136.931, 55.9154, -150
  point 3: 163.069, 55.9154, 150
Slice 311, pass = 0, slice in pass = 312, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 56.4154, 150
  point 2: -136.931, 56.4154, -150
  point 3: 163.069, 56.4154, 150
Slice 312, pass = 0, slice in pass = 313, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 56.9154, 150
  point 2: -136.931, 56.9154, -150
  point 3: 163.069, 56.9154, 150
Slice 313, pass = 0, slice in pass = 314, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 57.4154, 150
  point 2: -136.931, 57.4154, -150
  point 3: 163.069, 57.4154, 150
Slice 314, pass = 0, slice in pass = 315, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 57.9154, 150
  point 2: -136.931, 57.9154, -150
  point 3: 163.069, 57.9154, 150
Slice 315, pass = 0, slice in pass = 316, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 58.4154, 150
  point 2: -136.931, 58.4154, -150
  point 3: 163.069, 58.4154, 150
Slice 316, pass = 0, slice in pass = 317, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 58.9154, 150
  point 2: -136.931, 58.9154, -150
  point 3: 163.069, 58.9154, 150
Slice 317, pass = 0, slice in pass = 318, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 59.4154, 150
  point 2: -136.931, 59.4154, -150
  point 3: 163.069, 59.4154, 150
Slice 318, pass = 0, slice in pass = 319, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 59.9154, 150
  point 2: -136.931, 59.9154, -150
  point 3: 163.069, 59.9154, 150
Slice 319, pass = 0, slice in pass = 320, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 60.4154, 150
  point 2: -136.931, 60.4154, -150
  point 3: 163.069, 60.4154, 150
Slice 320, pass = 0, slice in pass = 321, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 60.9154, 150
  point 2: -136.931, 60.9154, -150
  point 3: 163.069, 60.9154, 150
Slice 321, pass = 0, slice in pass = 322, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 61.4154, 150
  point 2: -136.931, 61.4154, -150
  point 3: 163.069, 61.4154, 150
Slice 322, pass = 0, slice in pass = 323, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 61.9154, 150
  point 2: -136.931, 61.9154, -150
  point 3: 163.069, 61.9154, 150
Slice 323, pass = 0, slice in pass = 324, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 62.4154, 150
  point 2: -136.931, 62.4154, -150
  point 3: 163.069, 62.4154, 150
Slice 324, pass = 0, slice in pass = 325, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 62.9154, 150
  point 2: -136.931, 62.9154, -150
  point 3: 163.069, 62.9154, 150
Slice 325, pass = 0, slice in pass = 326, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 63.4154, 150
  point 2: -136.931, 63.4154, -150
  point 3: 163.069, 63.4154, 150
Slice 326, pass = 0, slice in pass = 327, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 63.9154, 150
  point 2: -136.931, 63.9154, -150
  point 3: 163.069, 63.9154, 150
Slice 327, pass = 0, slice in pass = 328, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 64.4154, 150
  point 2: -136.931, 64.4154, -150
  point 3: 163.069, 64.4154, 150
Slice 328, pass = 0, slice in pass = 329, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 64.9154, 150
  point 2: -136.931, 64.9154, -150
  point 3: 163.069, 64.9154, 150
Slice 329, pass = 0, slice in pass = 330, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 65.4154, 150
  point 2: -136.931, 65.4154, -150
  point 3: 163.069, 65.4154, 150
Slice 330, pass = 0, slice in pass = 331, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 65.9154, 150
  point 2: -136.931, 65.9154, -150
  point 3: 163.069, 65.9154, 150
Slice 331, pass = 0, slice in pass = 332, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 66.4154, 150
  point 2: -136.931, 66.4154, -150
  point 3: 163.069, 66.4154, 150
Slice 332, pass = 0, slice in pass = 333, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 66.9154, 150
  point 2: -136.931, 66.9154, -150
  point 3: 163.069, 66.9154, 150
Slice 333, pass = 0, slice in pass = 334, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 67.4154, 150
  point 2: -136.931, 67.4154, -150
  point 3: 163.069, 67.4154, 150
Slice 334, pass = 0, slice in pass = 335, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 67.9154, 150
  point 2: -136.931, 67.9154, -150
  point 3: 163.069, 67.9154, 150
Slice 335, pass = 0, slice in pass = 336, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 68.4154, 150
  point 2: -136.931, 68.4154, -150
  point 3: 163.069, 68.4154, 150
Slice 336, pass = 0, slice in pass = 337, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 68.9154, 150
  point 2: -136.931, 68.9154, -150
  point 3: 163.069, 68.9154, 150
Slice 337, pass = 0, slice in pass = 338, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 69.4154, 150
  point 2: -136.931, 69.4154, -150
  point 3: 163.069, 69.4154, 150
Slice 338, pass = 0, slice in pass = 339, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 69.9154, 150
  point 2: -136.931, 69.9154, -150
  point 3: 163.069, 69.9154, 150
Slice 339, pass = 0, slice in pass = 340, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 70.4154, 150
  point 2: -136.931, 70.4154, -150
  point 3: 163.069, 70.4154, 150
Slice 340, pass = 0, slice in pass = 341, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 70.9154, 150
  point 2: -136.931, 70.9154, -150
  point 3: 163.069, 70.9154, 150
Slice 341, pass = 0, slice in pass = 342, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 71.4154, 150
  point 2: -136.931, 71.4154, -150
  point 3: 163.069, 71.4154, 150
Slice 342, pass = 0, slice in pass = 343, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 71.9154, 150
  point 2: -136.931, 71.9154, -150
  point 3: 163.069, 71.9154, 150
Slice 343, pass = 0, slice in pass = 344, transpose = 3, rotation = 1, coilConfigUID = 0
  point 1: -136.931, 72.4154, 150
  point 2: -136.931, 72.4154, -150
  point 3: 163.069, 72.4154, 150

...........PRESCAN_HEADER..................
Offset to/size of PRESCAN_HEADER: 141320, 1500
...PS internal use only (variable "command"): 0
...PS MPS R1 setting 1 - 7: 7
...PS MPS R2 setting 1 - 30: 29
...PS MPS Transmit gain setting 0 - 200: 116
...PS MPS Center frequency Hz: 1277245260
...PS APS R1 setting 1 - 7: 7
...PS APS R2 setting 1 - 30: 29
...PS APS Transmit gain setting 0 - 200: 116
...PS APS Center frequency Hz: 1277245260
...PS rational scaling (variable "scalei"): 0.0010793
...PS unused (variable "scaleq"): 0
...PS noise test 0=16 1=32 bits 0, 1: 135522645
...PS prescan order logic (0-5): 2
...PS bit mask 4 bits: 0
...PS powerspec: 
...PS filler1: 0
...PS filler2: 0
...PS xshim: -6
...PS yshim: 3
...PS zshim: 0
...PS recon enable: 0
...Autoshim successful (1), autoshim failed/smart/OFF (0): 0
...PS mean +/- std noise each receiver: 
   rec[0]: 1 +/- 2.91919 (2.99359%)
   rec[1]: 1 +/- 3.26988 (2.38591%)
   rec[2]: 1 +/- 3.24389 (2.4243%)
   rec[3]: 1 +/- 2.78311 (3.29349%)
   rec[4]: 1 +/- 2.90387 (3.02526%)
   rec[5]: 1 +/- 3.85989 (1.71225%)
   rec[6]: 1 +/- 3.66103 (1.90331%)
   rec[7]: 1 +/- 3.04039 (2.75968%)
   rec[8]: 1 +/- 3.02331 (2.79096%)
   rec[9]: 1 +/- 3.67337 (1.89055%)
   rec[10]: 1 +/- 3.41083 (2.19279%)
   rec[11]: 1 +/- 2.76452 (3.33795%)
   rec[12]: 1 +/- 3.23792 (2.43324%)
   rec[13]: 1 +/- 3.66513 (1.89906%)
   rec[14]: 1 +/- 3.92206 (1.6584%)
   rec[15]: 1 +/- 3.12411 (2.61375%)
   rec[16]: 1 +/- 2.04892 (6.07668%)
   rec[17]: 1 +/- 2.33247 (4.68907%)
   rec[18]: 1 +/- 2.59245 (3.79574%)
   rec[19]: 1 +/- 2.27544 (4.92707%)
   rec[20]: 1 +/- 2.16371 (5.44906%)
   rec[21]: 1 +/- 3.22507 (2.45266%)
   rec[22]: 1 +/- 16.2556 (0.0965415%)
   rec[23]: 1 +/- 2.64872 (3.63618%)
   rec[24]: 1 +/- 2.4805 (4.1461%)
   rec[25]: 1 +/- 3.19319 (2.50189%)
   rec[26]: 1 +/- 3.23023 (2.44484%)
   rec[27]: 1 +/- 2.40528 (4.40947%)
   rec[28]: 1 +/- 2.37246 (4.53233%)
   rec[29]: 1 +/- 2.88536 (3.06421%)
   rec[30]: 1 +/- 2.64741 (3.63978%)
   rec[31]: 1 +/- 2.29964 (4.82391%)
...Spectro PS line width: -999
...Spectro PS water suppression flip angle: -999
...Spectro PS water suppression level: -999
...Smart prescan: 2
...Smart prescan string: TG/s1

			15x fields
...Variable "phase_correction_status": 0

			20x fields
...Variable "psc_ta": 123
...Variable "broad_band_select": 1

...........ExamData Type..................
Offset to/size of ExamData section: 142820, 1960
...Exam number: 1
...Exam description: MRI Abdomen Pelvis w/ + w/o Contrast
...Exam date/time stamp: (1305563068) Mon May 16 09:24:28 2011
...Start time (secs) of first axial in exam: 0
...Cell number at theta: 0
...Cell spacing: 0
...Distance from source to detector: 0
...Distance from source to iso: 0
...Indicates number of updates to header: 0
...Exam complete flag: 0
...Last series number used: 11
...Number of series archived: 0
...Number of series existing: 11
...Number of unstored series: 0
...Number of unarchived series: 11
...Number of prospective/scout series: 11
...Last model number used: 0
...Number of 3D models: 0
...Number of cells in detector: 0
...Magnet strength (in Gauss): 30000
...Patient weight: 16600
...Date/Time of last change: Mon May 16 09:24:28 2011
...The make-unique flag: 0
...Detector type: 0
...Tube type: 0
...DAS type: 0
...Number of decon kernels: 0
...Number of elements in a decon kernel: 0
...Decon kernel density: 0
...Decon kernel stepsize: 0
...Decon kernel shift count: 0
...Patient age (years, months or days): 0
...Patient age notation: 0
...Patient sex: 0
...Exam format: 6
...Trauma flag: 0
...Non-zero indicates protocol exam: 1
...Study has complete info (DICOM/genesis): 0
...Patient History: 
...Referring physician: 
...Diagnostician/Radiologist: 
...Operator: 
...Exam type: MR
...Creator suite and host: CHMR3T
...Process that allocated this record: MRIFCCALLOC
...Disk ID for this exam: 
...Hospital name: LUCILE PACKARD CHILDRENS 3T
...Suite ID for this exam: CHMR
...Genesis version - created: 23
...Genesis version - now: 23
...Unique system ID: 00000415723CHMR2
...Unique service ID: 
...Mobile location number: 9999
...Study entity unique ID: 1.2.840.113619.2.182.12251875122564.1305581138.872877
...Ref SOP class UID: 
...Ref SOP instance UID: 
...Patient name (FF): 
...Patient ID (FF): 
...Requisition number (FF): 
...Date of birth: 19000101
...Genesis exam UID: 1.2.840.113619.2.182.12251875122564.1305581138.872877
...Genesis exam number: 

...........SeriesData Type..................
Offset to/size of SeriesData section: 144780, 2560
...Exam number: 1
...Series number: 11
...Series description: GA COR FS MFAST A/P POST
...Allocation series data/time stamp: Mon May 16 09:58:28 2011
...Actual series data/time stamp: Mon May 16 09:58:28 2011
...PixelData size - as stored: 0
...PixelData size - compressed: 0
...PixelData size - uncompressed: 0
...Horizontal landmark: 1146.8
...First scan location (L/S): -99.0846
...Last scan location (L/S): 71.9154
...RAS letter for first scan location (L/S): P
...RAS letter for last scan location (L/S): A
...Series complete flag: 0
...Number of images archived: 0
...Last image number used: 344
...Number of images existing: 344
...Indicates number of updates to header: 0
...Number of unstored images: 344
...Number of unarchived images: 344
...Patient position: 1
...Patient entry: 2
...Landmark counter: 0
...Date/Time of last change: Mon May 16 09:58:28 2011
...Echo 1 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 2 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 3 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 4 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 5 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 6 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 7 alpha, beta, window, level values: 0, 0, 0, 0
...Echo 8 alpha, beta, window, level values: 0, 0, 0, 0
...Series type: 1
...Series from which prescribed: 0
...Most-like plane (for L/S): 8
...Scout or axial (for CT): 0
...The make-unique flag: 0
...Non-zero if > 0 image used contrast(L/S): 2
...Last pulse sequence used (L/S): 2
...Image sort order (L/S): 0
...Number of acquisitions: 0
...Starting number for baselines: 0
...Ending number for baselines: 0
...Starting number for enhanced scans: 0
...Ending number for enhanced scans: 0
...Table position for nMR and iMR: 0
...nMR - swing angle: 0
...nMR - lateral offset: 0
...Gradient coil selection: 0
...Genesis version - created: 23
...Genesis version - now: 23
...Suite ID for this series: CHMR
...Process that allocated this record: MRIFCCALLOC
...Disk ID for this series: 
...Primary receiver suite and host: CHMR3T
...Archiver suite and host: 
...Anatomical reference: 
...Scan protocol name: ABDO/PELVIS TUMOR
...Series entity unique ID: 1.2.840.113619.2.283.6945.140762.21332.1305553323.412
...Landmark unique ID: 1.2.840.113619.2.283.6945.140762.21332.1305553323.399
...Equipment unique ID: 1.2.840.113619.1.283.5.6945.140762
...Ref SOP class UID: 
...Ref SOP instance UID: 
...Sched proc action item seq - value: 
...Sched proc action item seq - description: 
...Sched proc action item seq - meaning: 
...Sched proc step desc: 
...Sched proc step ID 1: 
...Req proc step ID 1: 
...PPS ID: 
...PPS description: 
...Req proc step ID 2: 
...Req proc step ID 3: 
...Sched proc step ID 2: 
...Sched proc step ID 3: 
...Dicom reference images (4 UIDS): 
   (0): 
   (1): 
   (2): 
   (3): 

			11x fields
...fMRI ExpType: 0
...fMRI TrRest: 0
...fMRI TrActive: 0
...fMRI DumAcq: 0
...fMRI ExptTimePts: 0
...Supplement to se_typ, see DICOM (0008,0008): 0
...fMRI BWRT: 0
...fMRI PdgmStr: 
...fMRI PdgmDesc: 
...fMRI PdgmUID: 
...fMRI ApplName: 
...fMRI ApplVer: 

			12x fields
...Asset calibration series number: -1
...Asset calibration scan number: 0
...Product/Research/Service: 2
...Pure calibration series number: 5
...Pure calibration scan number: 1
...Asset application name:  
...Scic_a values from CoilConfig.cfg: 0
...Scic_s values from CoilConfig.cfg: 0
...Scic_c values from CoilConfig.cfg: 0
...PURE config parameters from pure.cfg: rev=1;a=75;b=2;c=32;d=8;e=3;f=2;g=1;h=0

			15x fields
...(IDEAL) water, fat, in-phase, and out-phase: 0

...........MRImgData Type..................
Offset to/size of MRImgData section: 147340, 2448
...Exam number for this image: 1
...Series number for this image: 11
...Image number: 1
...Actual image date/time stamp: Mon May 16 09:58:28 2011
...Allocation image date/time stamp: Mon May 16 09:58:28 2011
...Raw data run number: 48640
...Display field of view - x (mm): 300
...Display field of view - y (if different): 240
...Image matrix size - x: 512
...Image matrix size - y: 512
...Image dimension - x: 320
...Image dimension - y: 320
...Image pixel size - x: 0.5859
...Image pixel size - y: 0.5859
...Variable bandwidth (kHz): 62.5
...Pulse repetition time (usec): 4280
...Pulse echo time (usec): 976
...Second echo time (usec): 0
...Echo train length for fast spin echo: 1
...Fractional echo - effective TE flag: 1
...Pulse inversion time (usec): 9948
...Flip angle for GRASS scans (deg): 15
...Number of echoes: 1
...Echo number: 1
...Variable echo flag: 0
...Number of slices in this scan group: 172
...Slice thickness (mm): 1
...Spacing between scans (mm): -0.5
...Negative scan spacing for overlap slices: 0
...Continuous slices flag: 0
...Slice thickness (variable 'thk_disclmr'): 0
...Number of 3D slabs: 1
...Slice locations per 3D slab: 172
...Number of slice locs on each slab which overlap neighbors: 0
...Frequency direction: 2 (up/down)
...Swap phase/frequency axis: 0
...Slice offsets on frequency axis: 0
...Number of excitations: 1
...Duration of scan: 2.39891e+07
...Magnitude, phase, imaginary, or real: 0
...Plane type: 8
...Oblique plane: 8
...Scout type (A-P or lateral): 0
...Graphically prescribed: 0
...Series from which prescribed: 1
...Image from which prescribed: 13
...Image location: -99.0846
...RAS letter of image location: P
...(R,A,S) center coordinate of image: (-13.0693, -99.0846, -6.11285)
...(R,A,S) normal coordinate: (0, 1, 0)
...(R,A,S) coordinate of top left hand corner: (136.931, -99.0846, 143.887)
...(R,A,S) coordinate of top right hand corner: (-163.069, -99.0846, 143.887)
...(R,A,S) coordinate of bottom right hand corner: (-163.069, -99.0846, -156.113)
...Imaging mode: 9
...Imaging options: 1073776672 (EDR, Multi-Phase, Sat) (see also iopt2)
...Imaging option 2: 1073741888 (ZIP 2) (see also iopt3)
...Imaging option 3: 64 (ARC)
...Table delta: 0
...Pulse sequence: 2
...Pulse sequence mode: 0
...Pulse sequence name: mfast
...PSD creation date and time: Wed May  4 12:45:50 2011
...PSD name from inside PSD: mfast
...Type of receiver used: 1
...Coil type: 3
...Coil name: RM:PedTorso
...Surface coil type: 0
...Extremity coil flag: 0
...Surface coil intensity correction flag: 0
...IV contrast agent: Yes   MUL
...Oral contrast agent: 
...Image contrast mode: 2
...Cardiac repetition time: 0
...Cardiac heart rate (bpm): 0
...Trigger window (% of RR interval): 0
...Images per cardiac cycle: 0
...Cardiac phase number: 0
...Total number of cardiac phases prescribed: 0
...Tagging flip angle: 0
...Cardiac tagging orientation: 0
...Tag type: 0
...Tag space: 0
...Blood suppression TI: 0
...Delay time after trigger (msec): 0
...Minimum delay after trigger (usec): 0
...Fast CINE interpolation method: 0
...Fast CINE normalization type: 0
...Views per segment: 0
...Respiratory rate (breaths per min): 0
...Respiratory trigger point as percent of maximum: 0
...Respiratory trigger window: 0
...Number of fast phases: 1
...Number of EPI shots: 0
...Effective echo spacing for EPI: 0
...Diffusion direction for DW-EPI: 0
...B-value for DW-EPI: 50
...Average SAR: 1.37499
...Peak SAR: 2.74998
...Average head SAR: 1.37499
...Bitmap defining user CVs: 3855
...User usage tag ("defines how user CVs are filled in"): 0
...What process fills in the user CVs, ifcc or TIR ('user_fill_mapMSW'): 0
...What process fills in the user CVs, ifcc or TIR ('user_fill_mapLSW'): 0
...User variable 0: 2
...User variable 1: 0
...User variable 2: 2
...User variable 3: 0
...User variable 4: 0
...User variable 5: 100
...User variable 6: 1
...User variable 7: 20
...User variable 8: 1
...User variable 9: 2
...User variable 10: 3.6
...User variable 11: 2
...User variable 12: 0
...User variable 13: 16000
...User variable 14: 0
...User variable 15: 0
...User variable 16: 0
...User variable 17: 0
...User variable 18: 0
...User variable 19: 0
...User variable 20: 0
...User variable 21: 0
...User variable 22: 0
...User variable 23: 0
...User variable 24: 0
...User variable 25: 0
...User variable 26: 0
...User variable 27: 0
...User variable 28: 0
...User variable 29: 0
...User variable 30: 0
...User variable 31: 0
...User variable 32: 0
...User variable 33: 0
...User variable 34: 0
...User variable 35: 0
...User variable 36: 0
...User variable 37: 0
...User variable 38: 0
...User variable 39: 0
...User variable 40: 0
...User variable 41: 0
...User variable 42: 0
...User variable 43: 0
...User variable 44: 0
...User variable 45: 0
...User variable 46: 0
...User variable 47: 0
...User variable 48: 0
...dBdt peak rate of gradient field change (T/s): 0
...dBdt limit in units of percent of theoretical curve: 100
...PSD estimated dBdt limit in Teslas/sec: 0
...PSD estimated dBdt limit in units of percent: 0
...RTIA timer: 0
...RTIA fps: 0
...RTIA filter mode: 
...Bitmap of SAT selections: 0
...SAT fat/water/none: 9
...Concat sat type flag: 0
...R-side SAT pulse location relative to landmark: 9990
...L-side SAT pulse location relative to landmark: 9990
...A-side SAT pulse location relative to landmark: 9990
...P-side SAT pulse location relative to landmark: 9990
...S-side SAT pulse location relative to landmark: 9990
...I-side SAT pulse location relative to landmark: 9990
...Thickness of x axis SAT pulse: 0
...Thickness of y axis SAT pulse: 0
...Thickness of z axis SAT pulse: 0
...Preparatory pulse option: 0
...Magnitization Transfer offset frequency: 0
...Vascular mode: 0
...Phase contrast flow axis: 0
...Phase contrast velocity encoding: 0
...Scale weighted venc: 0
...Magnitude weighting flag: 2
...Collapse image: 0 (Unknown)
...Projection algorithm: 0
...Projection algorithm name: 
...Projection angle: 0
...X axis rotation: 0
...Y axis rotation: 0
...Z axis rotation: 0
...Pause time: 0
...Pause interval (slices): 0
...Interimage/interloc delay (usec): 0
...Image filtering 0.5/0.2 T: 0
...MR-YMS num_seg: 0
...Number of averages for spectro: 0
...Station index: 0
...Station total: 0
...Calibrated field strength (x10 uGauss): 0
...Scan acquisition number: 1
...GE image integrity: 0
...Identify image as original or unoriginal: 0
...Image complete flag: 0
...Reference image field: 
...Summary image field: 
...Window value: 0
...Level value: 0
...Lower range of pixels 1: 0
...Upper range of pixels 1: 0
...Lower range of pixels 2: 0
...Upper range of pixels 2: 0
...Screen format (8/16 bit): 16
...Image archive flag: 0
...Suite ID for this image: CHMR
...Image unique ID: 1.2.840.113619.2.283.6945.140762.17402.1305553387.439
...Service obj class unique ID: 1.2.840.10008.5.1.4.1.1.4
...Make-unique flag: 0
...Disk ID for this image: 
...Image compression type for allocation: 3
...Foreign image revision: 
...Image allocation key: MRIFCCALLOC
...Date/time of last change: Mon May 16 09:58:28 2011
...Genesis version - created: 23
...Genesis version - now: 23
...Pixel data ID: 
...Pixel data size - as stored: 0
...Pixel data size - compressed: 0
...Pixel data size - uncompressed: 0
...String slop field 2: 
...Bitmap of prescan options: 0

			11x fields
...Regressor value: 0
...Delay after acquisition (MP/fMRI screen): 0

			12x fields
...Slice asset in ASSET screen: 0
...Phase asset in ASSET screen: 0
...Corresponding 4 SAR values for defined terms: [1.37499, 2.74998, 1.37499, 0]
...SAR control mode (normal, 1st or 2nd): 1
...Variable 'sarDefinition': defined terms available: 7
...Shim FOV (2 terms): [0, 0]
...Shim (R,A,S) center (2 terms): [0, 0, 0], [0, 0, 0]
...dBdt control mode (normal, 1st or 2nd): 1
...Governing body MHW/IEC/FDA: 1
...Variable: 'no_shimvol': 0
...Variable: 'shim_vol_type': 0
...Variable: 'xml_psc_shm_vol': 
...GE coil name: C-RM:32chPedTorsoll
...Concatenated string of coilcode and chip serialID: 
     
...ASSET calibration series UID: 
...PURE calibration series UID: 1.2.840.113619.2.283.6945.140762.21332.1305553323.403

			14x fields
...fMRI: RXM blob size: 0
...fMRI: RXM blob size padding: 0
...Current phase for this image (DP): 1
...Acoustic reduction level: 0
...Slice group number (0 = no groups, 1 = 1st group, etc.: 1
...Number of slice groups (0 = no groups, 1 = 1st group, etc.: 1
...Display image in auto view: 1
...Variable: rxmpath: 
...Pulse sequence name annotation:  

			15x fields
...Slice number in group: 0 = no image, 1 = 1st image, etc.: 1

			16x/20x fields
...AutoSubParam struct: [0, 0, 0, 0, 0, 0]

			16x/22x fields
...Duration of label or control pulse for 3D ASL: 0

			20x fields
...Imaged Nucleus 1H=>Hydrogen, 13C=>carbon, 23NA=>Sodium, etc: 1

			21x fields
...MRE temporal phases: 0
...MEG frequency: 0
...MRE driver amplitude: 0
...MRE driver cycle per trigger: 0
...MEG direction: 4